Maintaining by Remote Dialing Through the AUX Interface
[Requirements]
The AUX interface of the router is connected to the modem. The remote PC dials up to the router through the HyperTerminal for configuration (note that it is not for service but for remote maintenance).
[Configuration script]
Configuration script |
interface Aux0 async mode flow /asynchronous interface in the flow control mode/ link-protocol ppp # user-interface aux 0 modem both /Enable modem on the AUX interface/ # |
[Tip]
For CMW3.4, you must enable modem dialing in the user-interface view.
该案例暂时没有网友评论
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作