How to View the Current Software Version

How to View the Current Software Version

 

To upgrade software and locate fault, you need to figure out the current software version.

 

The command to view the current software version is: <H3C>display version

 

The output information is as follows:

<H3C>disp ver

 Copyright Notice:

 All rights reserved (Dec 10 2004).

 Without the owner's prior written consent, no decompiling

 nor reverse-engineering shall be allowed.

 Huawei-3Com Versatile Routing Platform Software

 VRP(R) software, Version 3.40, Release 0006                          /Software version number/

 Copyright (c) 2003-2004 Hangzhou Huawei-3Com Tech. Co.,Ltd. All rights reserved.

 Copyright (c) 2000-2003 Huawei Tech. Co.,Ltd. All rights reserved.

 Quidway AR28-31 uptime is 0 week, 0 day, 0 hour, 28 minutes

 /******Equipment model                    Running time       **********/

 CPU type: PowerPC 8245 300MHz                 /CPU type/

 128M bytes SDRAM Memory                        /Memory capacity/

 32M bytes Flash Memory                         /FLASH capacity/

 128K bytes NvRAM Memory                        /NvRAM capacity/

 Pcb      Version:1.0

 Logic    Version:1.0

 BootROM  Version:9.07                           /BootROM version number/

  [SLOT 0] 2FE      (Hardware)2.1, (Driver)2.0, (Cpld)0.0      /****Type of the card inserted on the router

  [SLOT 1] 2SA      (Hardware)1.1, (Driver)1.5, (Cpld)0.0             Version of the card inserted on the router***********/

 

[Tip]

1. Be sure to provide the Release version number (Release 0006) after the version number (Version 3.40) in the version information!

2. You can execute the vrbd command to view the internal version number if necessary.