Q:What to do if the enable password is lost on the mid-range router
A:Reboot the router and press Ctrl+B to enter the BootROM. Select Clear application password and reboot the router. After reboot, press Enter for several times to directly enter the privilege mode. Enter the config mode and run the enable password command. Then, change the enable password and save the configuration by writing in privilege mode.
The method of clearing password differs with the router version:
1. Version 97: Incapable of clearing password, upgrade to V2.0.
2. V2.0
1> Press Shift+D while power-on self-test to enter the download interface.
2> Type * after the password is displayed.
3> Type Shift+3, that is to enter #.
3. vrp1.0
1> Press Ctrl+B while power-on self-test to enter the download interface.
2> Press Enter by default after the password is displayed.
3> Type Ctrl+P.
该案例暂时没有网友评论
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作