S3610/5510交换机在配置MCE功能时出现“VPN-Table is full”提示的解决方法
在S3610/5510上配置MCE功能时,应先配置“switch-mode mce”命令,并按提示重启设备,之后使用“display switch-mode”命令查看设备是否工作在MCE模式,如果是才可以开始配置,否则会提示“VPN-Table is full”。
具体操作过程如下:
[H3C]ip vpn-instance test ?
<cr>
[H3C]ip vpn-instance test
VPN-Table is full
[H3C]switch-mode mce
Changes to the running system mode have been stored, but cannot take effect
until the next reboot.
Use 'display switch-mode' to see what system mode is currently active.
<H3C>reboot
系统重启后…………
<H3C>dis switch-mode
The current system mode is Multi-Instance CE mode.
Number of VLANs: 1024
Number of VPN-Instances: 15
Max number of IPv4 unicast route entries: 15360
Max number of IPv4 multicast route entries: 512
Max number of IPv6 unicast route entries: 0
The system mode which will take effect after reboot is Multi-Instance CE mode.
<H3C>sys
System View: return to User View with Ctrl+Z.
[H3C]ip vpn-instance ?
STRING<1-31> Name of VPN-Instance
[H3C]ip vpn-instance test
[H3C-vpn-instance-test]
该案例暂时没有网友评论
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作