Sanclient软件不能发现FC客户端的解决方法
一 组网:
无
二 问题描述:
在sanclient中查看服务器,报以下红字部份错误
# ./sanclient monitor
SAN Client v4.50 (build 907)
Copyright 2001-2006 by FalconStor. All Rights Reserved.
Select an item:
0. < Quit >
1. List SAN Client Configuration
2. List SAN Devices
3. Add Storage Servers
4. Delete Storage Servers
5. Rescan SAN Devices
6. Attach SAN Devices
7. Detach SAN Devices
8. Enable Protocol
9. Disable Protocol
10. View Configured Protocol
Choose a number: 1
Failed to connect to client daemon at p630, 0
Configured Server(s) on client localhost:
Server : h3c-NeoStor
Invalid shandle -1
Failed to get Fibre Channel device count of server h3c-NeoStor, -13
Client daemon is not connected!
三 过程分析:
无
四 解决方法:
#vi /etc/hosts文件,确认以下红色字符串是否正确,如果没有,则添加该字符串
127.0.0.1 localhost loopback p630 # loopback (lo0) name/address
200.200.0.134 p630
该案例暂时没有网友评论
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作