WX5002的PPPoE Server功能的典型配置

WX5002的PPPoE Server功能的典型配置

适用WX5002版本：Comware Software, Version 5.20, Release 1106P01                                   

一、组网需求

WX5002、WA2110、H3C POE交换机、便携机（安装有11b/g无线网卡）

二、组网图

WX5002的IP地址为192.168.1.9，交换机的IP地址为192.168.1.254。

交换机作为二层交换机使用，WX5002和WA2110在同一VLAN。

本例中WA2110的序列号为210235A22W0077000088。

使用的SSID的名称为H3C-PPPoE。

三、WX交换机的典型配置

#                                           

 version 5.20, Release 1106P01              

#                                           

 sysname H3C                                 

#                                           

 ip pool 1 192.168.200.10 192.168.200.100   

#                                           

 domain default enable system               

#                                           

vlan 1                                       

#                                           

domain ppp                                  

 authentication ppp local                   

 authorization ppp local                    

 accounting ppp local                       

 access-limit disable                       

 state active                               

 idle-cut disable                           

 self-service-url disable                   

 ip pool 1 192.168.200.10 192.168.200.100   

domain system                                

 access-limit disable                       

 state active                               

 idle-cut disable                           

 self-service-url disable                   

#                                           

local-user h3c                              

 password simple h3c                        

 service-type ppp                           

#                                           

wlan rrm                                    

 dot11a mandatory-rate 6 12 24               

 dot11a supported-rate 9 18 36 48 54        

 dot11b mandatory-rate 1 2                  

 dot11b supported-rate 5.5 11               

 dot11g mandatory-rate 1 2 5.5 11           

 dot11g supported-rate 6 9 12 18 24 36 48 54

#                                            

wlan service-template 1 clear               

 ssid H3C-PPPoE                             

 bind WLAN-ESS 1                            

 authentication-method open-system          

 service-template enable                     

#                                           

interface Virtual-Template1                 

 ppp authentication-mode pap domain ppp     

 remote address pool 1                      

 ip address 192.168.200.1 255.255.255.0     

#                                            

interface NULL0                             

#                                           

interface Vlan-interface1                   

 pppoe-server bind Virtual-Template 1       

 ip address 192.168.1.9 255.255.255.0        

#                                           

interface GigabitEthernet1/0/1              

#                                           

interface GigabitEthernet1/0/2              

#                                           

interface M-Ethernet1/0/1                   

#                                           

interface WLAN-ESS1                         

#                                           

wlan ap ap1 model WA2100                    

 serial-id 210235A22W0077000088             

 radio 1                                    

  service-template 1                        

  radio enable                              

#                                           

user-interface aux 0                        

user-interface vty 0 4                      

#                                           

return                                      

四、客户端配置

1、在无线客户端上选择连接SSID “H3C-PPPoE”

2、使用PPPoE客户端进行PPPoE拨号，用户名“h3c”，密码“h3c”

2、拨号成功后，客户端获取PPPoE地址池中的地址，并可成功ping通192.168.200.1和192.168.1.9