端口下这两条命令只能同时配置上一条,后配置的命令将取代之前配置的那条命令。如下所示。
[S3600-EI-Ethernet1/0/2]dis th
#
interface Ethernet1/0/2
port link-type trunk
port trunk permit vlan all
loopback-detection control enable
loopback-detection enable
#
return
[S3600-EI-Ethernet1/0/2]loopback-detection shutdown enable
[S3600-EI-Ethernet1/0/2]dis th
#
interface Ethernet1/0/2
port link-type trunk
port trunk permit vlan all
loopback-detection enable
loopback-detection shutdown enable
#
return
该案例暂时没有网友评论
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作