WX5002的单一SSID不认证不密功能的典型配置

WX5002的单一SSID不认证不加密功能的典型配置

适用WX5002版本：Comware Software, Version 5.20, Release 1106P01                                   

一、组网需求

WX5002、WA2110、H3C POE交换机、便携机（安装有11b/g无线网卡）

二、组网图

WX5002的IP地址为192.168.1.99。

交换机作为二层交换机使用，WX5002和WA2110在同一VLAN。

本例中WA2110的序列号为210235A22W0074000003。

使用的SSID的名称为h3c。

三、WX交换机的典型配置

#                                                                              

 version 5.20, Release 1106P01                                                     

#                                                                               

 sysname H3C                                                                   

#                                                                              

 domain default enable system                                                   

#                                                                              

vlan 1                                                                         

#                                                                               

domain system                                                                  

 access-limit disable                                                          

 state active                                                                   

 idle-cut disable                                                              

 self-service-url disable                                                      

#                                                                              

dhcp server ip-pool pool1                                                      

 network 192.168.1.0 mask 255.255.255.0                                        

 gateway-list 192.168.1.254                                                    

 expired day 3                                                                  

#                                                                              

wlan service-template 1 clear                                                 

 ssid h3c                                                                   

 bind WLAN-ESS 1                                                               

 authentication-method open-system                                     

 service-template enable                                                        

#                                                                              

wlan rrm                                                                       

 11a mandatory-rate 6 12 24                                                     

 11a supported-rate 9 18 36 48 54                                              

 11b mandatory-rate 1 2                                                        

 11b supported-rate 5.5 11                                                     

 11g mandatory-rate 1 2 5.5 11                                                 

 11g supported-rate 6 9 12 18 24 36 48 54                                      

#                                                                              

interface NULL0                                                                 

#                                                                              

interface Vlan-interface1                                                      

 ip address 192.168.1.99 255.255.255.0                                          

#                                                                              

interface GigabitEthernet1/0/1                                                 

#                                                                               

interface GigabitEthernet1/0/2                                                 

#                                                                              

interface M-Ethernet1/0/1                                                       

#                                                                              

interface WLAN-ESS1                                                            

#                                                                               

wlan ap ap1 model WA2100                                                       

 serial-id 210235A22W0074000003

 radio 1                                                    

  service-template 1                                                            

  radio enable                                                                  

#                                                                              

 dhcp enable                                                                   

#                                                                              

user-interface aux 0                                                           

user-interface vty 0 4                                                         

#                                                                               

return