S3500-EA系列交换机带身份验证的NTP广播功能的配置
一、 组网需求:
(1)Switch C设置本地时钟作为参考时钟,层数为3;
(2)Switch C工作在广播服务器模式,从VLAN接口2向外发送广播报文;
(3)Switch D工作在广播客户端模式,从VLAN接口2监听广播报文;
(4)同时在Switch C和Switch D上配置NTP验证。
二、 组网图:
三、 配置步骤:
(1)配置Switch C
# 设置本地时钟作为参考时钟,层数为3。
<SwitchC> system-view
[SwitchC] ntp-service refclock-master 3
# 配置NTP验证。
[SwitchC] ntp-service authentication enable
[SwitchC] ntp-service authentication-keyid 88 authentication-mode md5 123456
[SwitchC] ntp-service reliable authentication-keyid 88
# 设置Switch C为NTP广播服务器并指定密钥编号。
[SwitchC] interface vlan-interface 2
[SwitchC-Vlan-interface2] ntp-service broadcast-server authentication-keyid 88
(2)配置Switch D
# 配置NTP验证。
<SwitchD> system-view
[SwitchD] ntp-service authentication enable
[SwitchD] ntp-service authentication-keyid 88 authentication-mode md5 123456
[SwitchD] ntp-service reliable authentication-keyid 88
# 设置Switch D为NTP广播客户端。
[SwitchD] interface vlan-interface 2
[SwitchD-Vlan-interface2] ntp-service broadcast-client
四、 配置关键点:
S3500-EA系列以太网交换机均不支持设置本身时钟为参考时钟,只有当其时钟被同步后,才能作为时钟源去同步其他设备。
该案例暂时没有网友评论
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作