Configure ADSL module using PPPoEoA access Internet

Configure ADSL module using PPPoEoA access Internet

 

Keywords：MSR; PPPoE;ATM;ADSL; PPPoEoA

 

1. Requirements

ADSL is a kind of access technical based on ATM, which adopt ATM interface display method in router. Router’s ATM1/0 binds Dialer1 using PPPoEoa dail-up access Internet.

Device：MSR series router

2. Network diagram

                      

3. Configuration steps

Device and version：MSR series, version 5.20 and Beta 1106。

RTA key configuration scripts

# //create dialer-rule 1 dialer-rule 1 ip permit # //Configure ACL for NAT acl number 2000  rule 0 permit source 192.168.1.0 0.0.0.255 # //create dialer 1 interface Dialer1 link-protocal ppp //Apply ACL 2000 for Easy IP NAT nat outbound 2000 //ADSL account and password for authentication ppp chap user hgw1 ppp chap password simple hgw // Acquire IP through PPP negotiation ip address ppp-negotiate dialer user hgw1 dialer-group 1 dialer bundle 1 # //create PVC interface Atm1/0 pvc 0/35 // bind the PVC and VE 1 map bridge Virtual-Ethernet1 # //bind VE 1 and dialer 1      interface Virtual-Ethernet1 pppoe-client dial-bundle-number 1 # //Configure dialer 1 as the default outgoing interface of the routing ip route-static 0.0.0.0 0.0.0.0 Dialer 1 preference 60 #

 

4. Tips

 

1 The ADSL method is actually same as PPPoEoA method.

2 ISP provide the VPI/VCI of PVC and PCV is: 0/35.