S2000-EA系列交换机IPv6应用的配置
一、 组网需求:
SWA、SWB和SWC分别代表三台交换机,其中SWA为H3C S2000-EA系列以太网交换机,SWB和SWC为支持IPv6路由转发的设备。在同一局域网中连接有Telnet和TFTP服务器,分别为交换机提供Telnet和TFTP服务。要求SWA可以通过Telnet方式登录Telnet_Server,并能够从TFTP_Server下载文件。
二、 组网图:
三、 配置步骤:
在进行下面的配置之前,需要在交换机和服务器的接口上配置IPv6地址,并保证交换机和服务器之间的路由可达。
# 在SWA上Ping SWB的IPv6地址。
<SWA> ping ipv6 3003::1
PING 3003::1 : 64 data bytes, press CTRL_C to break
Reply from 3003::1
bytes=56 Sequence=1 hop limit=64 time = 110 ms
Reply from 3003::1
bytes=56 Sequence=2 hop limit=64 time = 31 ms
Reply from 3003::1
bytes=56 Sequence=3 hop limit=64 time = 31 ms
Reply from 3003::1
bytes=56 Sequence=4 hop limit=64 time = 31 ms
Reply from 3003::1
bytes=56 Sequence=5 hop limit=64 time = 31 ms
--- 3003::1 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 31/46/110 ms
# SWA上配置到SWC、Telnet Server和TFTP Server的静态路由。
<SWA> system-view
[SWA] ipv6 route-static 3002:: 64 3003::1
[SWA] ipv6 route-static 3001:: 64 3003::1
[SWA] quit
# 跟踪SWA到SWC的IPv6路由。
<SWA> tracert ipv6 3002::1
traceroute to 3002::1 30 hops max,60 bytes packet,press CTRL_C to break
1 3003::1 30 ms 0 ms 0 ms
2 3002::1 10 ms 10 ms 0 ms
# SWA从TFTP服务器3001::3上下载文件。
<SWA> tftp ipv6 3001::3 get filetoget flash:/filegothere
....
File will be transferred in binary mode
Downloading file from remote tftp server, please wait..... received: 4469 bytes in 1.243 seconds
File downloaded successfully.
# SWA连接到Telnet服务器3001::2。
<SWA> telnet ipv6 3001::2
Trying 3001::2...
Press CTRL+K to abort
Connected to 3001::2 ...
Telnet Server>
四、 配置关键点:
无
该案例暂时没有网友评论
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作