IX3000存储产品SAN Client软件在AIX系统上的配置
一、 组网需求:
AIX系统:AIX4.3.3.x (32-bit)、AIX 5.3 (64-bit)、AIX 5.2 (64-bit)、AIX 5.1 (64-bit)
SAN Client:sanclient-4.50-907
二、 组网图:
无
三、 配置步骤:
1 执行以下命令在客户端配置SANClient
# cd /usr/local/sanclient/bin
# ./sanclient monitor
SAN Client v4.50 (build 907)
Copyright 2001-2006 by FalconStor. All Rights Reserved.
SAN/IP protocol is not available for this client due to missing client kernel package!
Do you wish to enable Fibre Channel protocol support for this client? (y|n)[n] n 不启用FC协议
Do you wish to enable iSCSI protocol support for this client? (y|n)[n] y启用ISCSI协议
Select an item:
0. < Quit >
1. List SAN Client Configuration
2. List SAN Devices
3. Add Storage Servers
4. Delete Storage Servers
5. Rescan SAN Devices
6. Attach SAN Devices
7. Detach SAN Devices
8. Enable Protocol
9. Disable Protocol
10. View Configured Protocol
Choose a number: 3
Adding a Server.
Enter name (or IP address) of your Storage Server : 200.200.10.162 存储IP
Enter a login ID from the SAN admin group on your Storage Server: root 存储用户名
Enter password:×××××× 存储密码
Getting shared secret..
Adding client to server's configuration file..
Done.
Does this Client have more Servers to configure? (y|n)[y] n 是否继续添加存储,选n
1 Storage Server(s) added.
Please run "sanclient restart" to make your change effective.
Select an item:
0. < Quit >
1. List SAN Client Configuration
2. List SAN Devices
3. Add Storage Servers
4. Delete Storage Servers
5. Rescan SAN Devices
6. Attach SAN Devices
7. Detach SAN Devices
8. Enable Protocol
9. Disable Protocol
10. View Configured Protocol
Choose a number: 0
2 在AIX命令行下运行如下命令,启动SAN客户端软件:
#sanclient start
运行如下命令,确认处于运行状态:
#sanclient status
显示为RUNNING
3 在存储上会生成一个以服务器名称命名的客户端
通过配置客户属性配置服务器IP及类型
4 通过以下命令可以查看服务器名称
# hostname
localhost
四、 配置关键点:
无
该案例暂时没有网友评论
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作