IX3000产品sanclient软件在linux系统上的配置

SAN Client在LINUX上配置

 

一、 组网需求：

对于Linux， SAN客户端软件分为两个组件：用户模式和内核模式。由于不使用SAN/IP，对于FC和iSCSI来说，只需要安装用户模式，即只需安装sanclient- -<version>-<build>.i386.rpm（如：sanclient-4.50-0.904.i386.rpm）。这使得SAN客户端软件不受Linux操作系统内核版本的限制。

区分i386和X86_64两种版本

SAN Client：sanclient-4.50-0.955.i386.rpm

SAN Client：sanclient-4.50-0.956.x86_64.rpm

二、 组网图：

无

三、 配置步骤：

1 执行以下命令在客户端配置SANClient

# cd /usr/local/sanclient/bin

# ./sanclient monitor

SAN Client v4.50 (build 907)

Copyright 2001-2006 by FalconStor. All Rights Reserved.

SAN/IP protocol is not available for this client due to missing client kernel package!

Do you wish to enable Fibre Channel protocol support for this client? (y|n)[n] n

#说明：不启用FC协议

Do you wish to enable iSCSI protocol support for this client? (y|n)[n]

#说明：启用ISCSI协议

Select an item:

0. < Quit >

1. List SAN Client Configuration

2. List SAN Devices

3. Add Storage Servers

4. Delete Storage Servers

5. Rescan SAN Devices

6. Attach SAN Devices

7. Detach SAN Devices

8. Enable Protocol

9. Disable Protocol

10. View Configured Protocol

Choose a number: 3

Adding a Server.

Enter name (or IP address) of your Storage Server :  200.200.10.162

#说明：输入存储设备业务口的IP地址

Enter a login ID from the SAN admin group on your Storage Server:  root

#说明：输入存储设备的用户名

Enter password:×××××× 

#说明：输入存储设备的密码

Getting shared secret..

Adding client to server's configuration file..

Done.

Does this Client have more Servers to configure? (y|n)[y] n

#说明：是否继续添加存储，选n

1    Storage Server(s) added.

Please run "sanclient restart" to make your change effective.

Select an item:

0. < Quit >

1. List SAN Client Configuration

2. List SAN Devices

3. Add Storage Servers

4. Delete Storage Servers

5. Rescan SAN Devices

6. Attach SAN Devices

7. Detach SAN Devices

8. Enable Protocol

9. Disable Protocol

10. View Configured Protocol

Choose a number: 0

2 在LINUX命令行下运行如下命令，启动SAN客户端软件：

#sanclient start

运行如下命令，确认处于运行状态：

#sanclient status

显示为RUNNING

四、 配置关键点：

无