H3C S3500-EA NQA ICMP-echo测试的典型配置
一、 组网需求:
使用NQA进行ICMP-echo测试,测试本端(Device A)发送的报文是否可以到达指定的目的端(Device B),以及报文的往返时间。
二、 组网图:
三、 配置步骤:
# 创建ICMP-echo类型的NQA测试组并配置相关测试参数。
<DeviceA> system-view
[DeviceA] nqa entry admin test
[DeviceA-nqa-admin-test] type icmp-echo
[DeviceA-nqa-admin-test-icmp-echo] destination ip 10.2.2.2
# 配置可选参数。
[DeviceA-nqa-admin-test-icmp-echo] probe count 10
[DeviceA-nqa-admin-test-icmp-echo] probe timeout 500
[DeviceA-nqa-admin-test-icmp-echo] frequency 5000
[DeviceA-nqa-admin-test-icmp-echo] history-records 10
[DeviceA-nqa-admin-test-icmp-echo] quit
# 启动ICMP-echo测试操作。
[DeviceA] nqa schedule admin test start-time now lifetime forever
# 测试执行一段时间后,停止ICMP-echo测试操作。
[DeviceA] undo nqa schedule admin test
# 显示ICMP-echo测试中最后一次测试的结果。
[DeviceA] display nqa result admin test
NQA entry(admin admin, tag test) test results:
Destination IP address: 10.2.2.2
Send operation times: 10 Receive response times: 10
Min/Max/Average round trip time: 2/5/3
Square-Sum of round trip time: 96
Last succeeded probe time: 2007-08-23 15:00:01.2
Extend results:
Packet lost in test: 0%
Failures due to timeout: 0
Failures due to disconnect: 0
Failures due to no connection: 0
Failures due to sequence error: 0
Failures due to internal error: 0
Failures due to other errors: 0
# 显示ICMP-echo测试的历史记录。
[DeviceA] display nqa history admin test
NQA entry(admin admin, tag test) history record(s):
Index Response Status Time
370 3 Succeeded 2007-08-23 15:00:01.2
369 3 Succeeded 2007-08-23 15:00:01.2
368 3 Succeeded 2007-08-23 15:00:01.2
367 5 Succeeded 2007-08-23 15:00:01.2
366 3 Succeeded 2007-08-23 15:00:01.2
365 3 Succeeded 2007-08-23 15:00:01.2
364 3 Succeeded 2007-08-23 15:00:01.1
363 2 Succeeded 2007-08-23 15:00:01.1
362 3 Succeeded 2007-08-23 15:00:01.1
361 2 Succeeded 2007-08-23 15:00:01.1
四、 配置关键点:
无.
该案例暂时没有网友评论
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作