1、重启oap单板,登录路由器,执行如下命令
<icg3000>oap reboot slot 3
This command will recover the OAP from shutdown or other failed state.
Warning: This command may lose the data on the hard disk if the OAP is not being shut down! Continue? [Y/N]:y
Reboot OAP by command.2、重启后连接OAP的单板
< icg3000>o c s 33、看到LILO的提示符后,通过tab键可以查看启动的引导选项,在引导选项后加上single字样,如:
LILO boot: linux-ramdisk single
然后启动,启动后使用passwd修改密码,再次正常重启之后就可以使用新密码进行登录。
该案例暂时没有网友评论
✖
案例意见反馈
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作