EX_VX1500的开局磁盘检测

EX_VX1500开局磁盘扫描

 

一、 组网需求：

无

二、 组网图：

无

三、 配置步骤：

 

只适用于EX_VX1500 E1106P02后版本

 

3.1 对DEU磁盘写检测

对EX_VX1500磁盘磁盘做检测需在storware环境中进行，通过ssh2或串口终端登录存储后运行cli进入storware模式如下:

h3c-1#cli

<Storware>

对所有待检测磁盘以DEU框为单位，输入写检测命令：

<Storware>diskscan start mode=write location=0,0,0

 Performance may be affected by this operation, are you sure to continue? Y/N y

  *******************************************************************

  $Disk scan scheduled:

   {0,0,0,0}  {0,0,0,1}  {0,0,0,2}  {0,0,0,3}  {0,0,0,4}  {0,0,0,5}

   {0,0,0,6}  {0,0,0,7}  {0,0,0,8}  {0,0,0,9}  {0,0,0,10} {0,0,0,11}

   {0,0,0,12} {0,0,0,13} {0,0,0,14} {0,0,0,15}

  *******************************************************************

对其它DEU框执行同样检测命令：

<Storware>diskscan start mode=write location=0,0,1 （0,0,2/0,0,3）

 

如果对所有磁盘执行检测，则location=all既可：

<Storware>diskscan start mode= write location=all

 

3.2 查看磁盘检测进度

使用diskscan status查询检测中磁盘的检测进度：

<Storware>diskscan status

  *******************************************************************

  location          percent            start_time            mode

  {0,0,0,0}           73%          2009-12-10 16:11:40     readonly

  {0,0,0,1}           74%          2009-12-10 16:11:40     readonly

  {0,0,0,2}           40%          2009-12-10 16:11:40     readonly

  {0,0,0,3}           72%          2009-12-10 16:11:40     readonly

  {0,0,0,4}           40%          2009-12-10 16:11:40     readonly

  {0,0,0,5}           74%          2009-12-10 16:11:40     readonly

  {0,0,0,6}           41%          2009-12-10 16:11:40     readonly

  {0,0,0,7}           41%          2009-12-10 16:11:40     readonly

  *****************************************************************

 

四、 配置关键点：

?无