S5130S-28S-EI 断电后重启光口灯不亮，拔下光纤重新插上即通

问题如题，贴上日志，光口在1/0/25:

%Dec 31 23:59:54:161 2012 ShuoXunLou_S5130_709 SYSLOG/6/SYSLOG_RESTART: System r
estarted --
H3C Comware Software.
%Jan  1 00:00:10:277 2013 ShuoXunLou_S5130_709 OPTMOD/4/MODULE_IN: Ten-GigabitEt
hernet1/0/25: The transceiver is 1000_BASE_LX_SFP.
%Jan  1 00:00:36:581 2013 ShuoXunLou_S5130_709 IFNET/3/PHY_UPDOWN: Physical stat
e on the interface GigabitEthernet1/0/11 changed to up.
%Jan  1 00:00:36:589 2013 ShuoXunLou_S5130_709 IFNET/5/LINK_UPDOWN: Line protoco
l state on the interface GigabitEthernet1/0/11 changed to up.
%Jan  1 00:00:36:974 2013 ShuoXunLou_S5130_709 IFNET/3/PHY_UPDOWN: Physical stat
e on the interface GigabitEthernet1/0/9 changed to up.
%Jan  1 00:00:36:980 2013 ShuoXunLou_S5130_709 IFNET/5/LINK_UPDOWN: Line protoco
l state on the interface GigabitEthernet1/0/9 changed to up.
%Jan  1 00:00:52:715 2013 ShuoXunLou_S5130_709 IFNET/3/PHY_UPDOWN: Physical stat
e on the interface GigabitEthernet1/0/9 changed to down.
%Jan  1 00:00:52:717 2013 ShuoXunLou_S5130_709 IFNET/5/LINK_UPDOWN: Line protoco
l state on the interface GigabitEthernet1/0/9 changed to down.
%Jan  1 00:00:55:844 2013 ShuoXunLou_S5130_709 IFNET/3/PHY_UPDOWN: Physical stat
e on the interface GigabitEthernet1/0/9 changed to up.
%Jan  1 00:00:55:852 2013 ShuoXunLou_S5130_709 IFNET/5/LINK_UPDOWN: Line protoco
l state on the interface GigabitEthernet1/0/9 changed to up.
%Jan  1 00:01:07:436 2013 ShuoXunLou_S5130_709 STP/6/STP_DETECTED_TC: Instance 0
's port GigabitEthernet1/0/11 detected a topology change.
%Jan  1 00:01:17:722 2013 ShuoXunLou_S5130_709 IFNET/3/PHY_UPDOWN: Physical stat
e on the interface Ten-GigabitEthernet1/0/25 changed to up.

该口配置如下：

interface Ten-GigabitEthernet1/0/25
 port link-type trunk
 port trunk permit vlan 1 100 to 101
 speed 1000
 duplex full

对端10508下端口配置：

interface GigabitEthernet8/0/18
 port link-mode bridge
 port link-type trunk
 port trunk permit vlan 1 100
 speed 1000
 duplex full