ap

1.1.1  AP瘦切胖配置案例（命令行）

 操作风险提示：AP瘦切胖有风险，操作不当或者意外断电会导致设备故障，操作需谨慎。WAP722E和、WAP722没有Console口，建议使用Telnet方式登入命令行

命令行升级需在PC上搭建TFTP Server（推荐用户使用3CDaemon搭建TFTP服务器）

将软件版本下载到设备FLASH内，然后通过命令行加载Bootrom版本，再加载主机软件版本，加载时输入的文件名一定要一致，建议复制黏贴，然后升级过程中避免断电重启操作。

具体操作如下：

1. 从新华三的官网下载对应AP型号的胖版本，下载到电脑后，需修改文件名，以WAP621为例子，修改对应的启动文件名wa2600a_fat.bin，需要注意文件名称修改正确。

AP型号和使用版本关系：

 

AP-mode	版本名称
H3C WAP621	wa2600a_fat.bin
H3C WAP722	wa4300_fat.bin
H3C WAP722E
H3C WAP722S	wa4300s_fat.bin
H3C WAP712C

            

 

   

2.  电脑网卡设置为：192.168.0.1/255.255.255.0 ，如下例子打开TFTP服务器，把软件版本WA2600a_fat.bin放到电脑桌面上，TFTP服务器目录指向电脑桌面，然后点击确定

3. 创建AP的ip地址，AP设置地址为192.168.0.2 255.255.255.0，和电脑同一个网段，保证电脑和AP网络可达。以下标黑部分为设备自动打印部分，标红加粗的命令是需要手动输入。

<H3C> system

   [H3C] interface vlan1

   [H3C-Vlan-interface1] ip address 192.168.0.2 255.255.255.0

   [H3C-Vlan-interface1] quit

4. 通过TFTP上传胖AP：wa2620a_fat.bin，192.168.0.1是电脑的ip，

 <H3C> tftp 192.168.0.1 get wa2600a_fat.bin

  File will be transferred in binary mode.

  Downloading file from remote tftp server, please wait........................................................................................................................

  TFTP:  4602950 bytes received in 115 second(s).

  File downloaded successfully.

备注：如果提示FLASH空间不足已放下新版本请将老版本删除，删除后请勿重启，否则设备已无系统，只能通过bootrom升级。

<H3C>delete /unreserved wa2600a_fit.bin      

 //如果空间不够，可以删除原有的软件版本释放存储空间

<H3C> tftp 192.168.0.1 get wa2600a_fat.bin

5. 加载BOOTROM

<H3C> bootrom update file wa2600a_fat.btm（此步忽略）

please wait ...

Bootrom is updated!

6. 加载主机软件

<H3C> boot-loader file wa2600a_fat.bin main

<H3C> reboot

7. 重启设备完成后就可以使用默认的管理地址192.168.0.50登录AP进行管理了。登录AP的默认用户名是admin，密码是h3capadmin。

 

1.1.2  AP瘦切胖配置案例（Bootrom）

1. 使用Console口登入到命令行，从官网下载WAP621的软件版本，将压缩包解压，将里面的文件名称修改为wa2600a_fat.bin

2. 电脑网卡设置为：192.168.0.1 255.255.255.0，如下例子打开TFTP服务器，把软件版本WA2600a_fat.bin放到电脑桌面上，TFTP服务器目录指向电脑桌面，然后点击确定

 

3. 在AP重启的时候按住Ctrl+B进入设备的bootroom菜单，以下标黑部分为设备自动打印部分，标红加粗的命令是需要手动输入。

===============<EXTEND-BOOTWARE MENU>=========================

|<1> Boot System

|<2> Enter Serial SubMenu

|<3> Enter Ethernet SubMenu

|<4> File Control

|<5> Restore to Factory Default Configuration

|<6> Skip Current System Configuration

|<7> BootWare Operation Menu

|<8> Clear Super Password

|<9> Storage Device Operation

|<0> Reboot

===============================================================

Ctrl+C: Display Copyright

Ctrl+F: Format File System

Enter your choice(0-9): Ctrl+F

y

Enter your choice(0-9): 3（此处输入）

================<Enter Ethernet SubMenu>==========================

|Note:the operating device is flash

|<1> Download Application Program To SDRAM And Run

|<2> Update Main Application File

|<3> Update Backup Application File

|<4> Update Secure Application File

|<5> Modify Ethernet Parameter

|<0> Exit To Main Menu

|<Ensure The Parameter Be Modified Before Downloading!> 

                  =============================================================

4. 进入修改以太网参数菜单，使用TFTP网络协议传输wa2600a_fat.bin到AP上

Enter your choice(0-5): 5

===========<ETHERNET PARAMETER SET>=====================

|Note:       '.' = Clear field.

|            '-' = Go to previous field.

|          Ctrl+D = Quit.

===============================================================

Protocol (FTP or TFTP) : TFTP

//忽略输出内容，直接输入TFTP，然后回车

Load File Name         :wa2600a_fat.bin

//忽略输出内容，直接输入wa2600a_fat.bin，然后回车

Target File Name       :wa2600a_fat.bin  

//忽略输出内容，直接输入wa2600a_fat.bin，然后回车

Server IP Address      :192.168.0.1   

//忽略输出内容，直接输入电脑主机的 IP，比如192.168.0.1，然后回车

Local IP Address       :192.168.0.50

//忽略输出内容，直接输入和电脑主机的ip同一网段，比如192.168.0.50，然后回车

Gateway IP Address     :0.0.0.0

//忽略输出内容，直接回车

备注：注意给电脑手动配置一个与AP同网段的IP地址，保证电脑与AP路由可达

 

=============<Enter Ethernet SubMenu>==========================

|Note:the operating device is flash

|<1> Download Application Program To SDRAM And

|<2> Update Main Application File

|<3> Update Backup Application File

|<4> Update Secure Application File

|<5> Modify Ethernet Parameter

|<0> Exit To Main Menu

|<Ensure The Parameter Be Modified Before Downloading!>

 

=============================================================

Enter your choice(0-5): 2   //此时可以看到TFTP服务器上数据上传的滚动

Loading.....................................................................

....................................Done!

5. 返回主菜单，查看设备上是否真的已经上传了该软件版本

=================<Enter Ethernet SubMenu>==========================

|Note:the operating device is flash

|<1> Download Application Program To SDRAM And R

|<2> Update Main Application File

|<3> Update Backup Application Fil

|<4> Update Secure Application File

|<5> Modify Ethernet Parameter

||<0> Exit To Main Menu

|<Ensure The Parameter Be Modified Before Downloading!>

                   |=================================================================

Enter your choice(0-5): 0

===============<EXTEND-BOOTWARE MENU>===========================

<1> Boot System

<2> Enter Serial SubMenu

<3> Enter Ethernet SubMenu

<4> File Control

<5> Restore to Factory Default Configuration

<6> Skip Current System Configuration

<7> BootWare Operation Menu

<8> Clear Super Password

<9> Storage Device Operation

<0>Reboot                                                                ==========================================================

Ctrl+C: Display Copyright

Ctrl+F: Format File System

Enter your choice(0-9): 4

=====================<File CONTROL>===============================

|Note:the operating device is flash

<1> Display All File(s)

<2> Set Application File type

<3> Delete File

<0> Exit To Main Menu

==============================================================

Enter your choice(0-3): 1

Display all file(s) in flash:

 

|NO. Size(B)   Time                 Type   Name                          

||1   9124864   Aug/08/2008 20:00:00 M      wa2600a_fat.bin                

==============================================================

6. 返回主菜单，将设备进行重启

|Note:the operating device is flash

<1> Display All File(s)

<2> Set Application File type

<3> Delete File

<0> Exit To Main Menu

=================================================================

Enter your choice(0-3): 0

==================<EXTEND-BOOTWARE MENU>===========================

<1> Boot System

<2> Enter Serial SubMenu

<3> Enter Ethernet SubMenu

<4> File Control

<5> Restore to Factory Default Configuration

<6> Skip Current System Configuration

<7> BootWare Operation Menu

<8> Clear Super Password

<9> Storage Device Operation

<0>Reboot                                                                ==================================================================

Ctrl+C: Display Copyright

Ctrl+F: Format File System

Enter your choice(0-9): 0

System is starting...

 

7. 重启设备完成后就可以使用默认的管理地址192.168.0.50登录AP进行管理了。登录AP的默认用户名是admin，密码是h3capadmin。