WP2016无线注入器无开启WEB管理命令

不是

http://www.h3c.com/cn/d_201202/738423_30005_0.htm#_Toc289264957 看看这个手册吧 里面有写怎么web登陆

<H3C> system-view [H3C] local-user admin [H3C-luser-admin] service-type telnet level 3 [H3C-luser-admin] password simple admin这段已经配置过了，但还是不行

不应该啊 整个版本看看

<POE>dis cur # sysname POE # radius scheme system # domain system # local-user admin password simple admin service-type ssh telnet terminal level 3 # vlan 1 # vlan 100 # interface Vlan-interface1 ip address 192.168.0.254 255.255.255.0 # interface Aux1/0/0 # interface Ethernet1/0/1 poe enable port access vlan 100 # interface Ethernet1/0/2 poe enable port access vlan 100 # interface Ethernet1/0/3 poe enable port access vlan 100 # interface Ethernet1/0/4 poe enable port access vlan 100 # interface Ethernet1/0/5 poe enable port access vlan 100 # interface Ethernet1/0/6 poe enable port access vlan 100 # interface Ethernet1/0/7 poe enable port access vlan 100 # interface Ethernet1/0/8 poe enable port access vlan 100 # interface Ethernet1/0/9 port access vlan 100 # interface Ethernet1/0/10 poe enable port access vlan 100 # interface Ethernet1/0/11 port access vlan 100 # interface Ethernet1/0/12 port access vlan 100 # interface Ethernet1/0/13 port access vlan 100 # interface Ethernet1/0/14 port access vlan 100 # interface Ethernet1/0/15 port access vlan 100 # interface Ethernet1/0/16 port access vlan 100 # interface GigabitEthernet1/1/1 port link-type trunk port trunk permit vlan all # interface GigabitEthernet1/1/2 port link-type trunk port trunk permit vlan all shutdown # interface GigabitEthernet1/2/1 port link-type trunk port trunk permit vlan all shutdown # interface GigabitEthernet1/2/2 port link-type trunk port trunk permit vlan all # interface NULL0 # ip route-static 0.0.0.0 0.0.0.0 192.168.0.1 preference 60 # snmp-agent snmp-agent local-engineid 800007DB3822D6B716DE6877 snmp-agent community write writetest snmp-agent sys-info version all # user-interface aux 0 authentication-mode password set authentication password cipher .]@USE=B,53Q=^Q`MAF4<1!! user-interface vty 0 user privilege level 3 set authentication password cipher .]@USE=B,53Q=^Q`MAF4<1!! user-interface vty 1 4 # return

就是早期的老产品了，但是使用还是正常的，想着放家挂个监控上去还凑活。

http server enable ？

他都没有http这个指令

那估计就是不支持了，你看的哪里的文档

http://www.h3c.com/cn/d_201202/738423_30005_0.htm#_Toc289264957

缺省开启WEB，你删除配置文件，重启看下，不行就真的不行了

文档中是写的有WEB管理的开启方式为<H3C> system-view [H3C] local-user admin [H3C-luser-admin] service-type telnet level 3 [H3C-luser-admin] password simple admin 且我设置了vlan1的IP地址 并配置了静态路由，现在能通过Telnel的方式在局域网内登录，就是WEB怎么都搞不起来

我通过reset saved-configuration恢复过出厂设置，也都还是不行

这个无解了

感谢回复

不客气