MSR36-10光口如何配置？
- 0关注
- 1收藏，1382浏览
问题描述：
display transceiver interface GigabitEthernet0/0 transceiver information: The transceiver is absent. GigabitEthernet3/6 transceiver information: Transceiver Type : 1000_BASE_LX_SFP Connector Type : LC Wavelength(nm) : 1310 Transfer Distance(km) : 10(SMF) Digital Diagnostic Monitoring : YES Vendor Name : H3C Ordering Name : SFP-GE-LX-SM1310-D GigabitEthernet3/7 transceiver information: The transceiver is absent.
GigabitEthernet3/6 Current state: UP Line protocol state: UP Description: to- Bandwidth: 100000 kbps Maximum transmission unit: 1500 Internet address: 192.168.1.242/30 (Primary) IP packet frame type: Ethernet II, hardware address: d461-fe43-b857 IPv6 packet frame type: Ethernet II, hardware address: d461-fe43-b857 Media type: Twisted pair, loopback: Not set, promiscuous mode: Not set 100Mbps-speed mode, full-duplex mode Link speed type is force link, link duplex type is force link Flow-control: Disabled Port priority: 0 Output queue - Urgent queuing: Size/Length/Discards 0/1024/0 Output queue - Protocol queuing: Size/Length/Discards 0/500/0 Output queue - FIFO queuing: Size/Length/Discards 0/75/0 Last link flapping: 78 weeks 5 days 1 hours 14 minutes Last clearing of counters: Never Current system time:2020-12-09 13:04:05 Last time when physical state changed to up:2019-06-07 11:49:40 Last time when physical state changed to down:2019-06-07 11:49:17 Last 300 second input: 12 packets/sec 2098 bytes/sec 0% Last 300 second output: 10 packets/sec 1679 bytes/sec 0% Input (total): 462541065 packets, 2745687181 bytes - unicasts, - broadcasts, - multicasts, 0 pauses Input (normal): - packets, - bytes 438927072 unicasts, 7 broadcasts, 23613986 multicasts, 0 pauses Input: 0 input errors, 0 runts, 0 giants, - throttles 0 CRC, 0 frame, 0 overruns, 0 aborts - ignored, - parity errors Output (total): 389229176 packets, 59663413723 bytes - unicasts, - broadcasts, - multicasts, - pauses Output (normal): 389229176 packets, 59663413723 bytes 389229170 unicasts, 6 broadcasts, 0 multicasts, 0 pauses Output: 0 output errors, - underruns, - buffer failures 0 aborts, 0 deferred, 0 collisions, 0 late collisions - lost carrier, - no carrier
组网及组网描述：
这个端口已经有配置了？请问大家这个是怎么回事？光电口复用？我要怎么用新的这个光口，电口有影响么？
- 2020-12-09提问
- 举报
-
(0)
最佳答案
MSR3610光口应该不是复用口，看信息是没识别到模块，需要先确认一下模块是什么模块，是否和MSR3610适配。
- 2020-12-09回答
- 评论(2)
- 举报
-
(0)
GigabitEthernet3/6 transceiver information: Transceiver Type : 1000_BASE_LX_SFP Connector Type : LC Wavelength(nm) : 1310 Transfer Distance(km) : 10(SMF) Digital Diagnostic Monitoring : YES Vendor Name : H3C Ordering Name : SFP-GE-LX-SM1310-D 这个就是模块的型号，但是显示是3/6，而3/6已经有配置了啊？
speed 1000 、 duplex full配上试试
亲~登录后才可以操作哦!
确定你的邮箱还未认证，请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
- 1. 您举报的内容是什么？（请在邮件中列出您举报的内容和链接地址）
- 2. 您是谁？（身份证明材料，可以是身份证或护照等证件）
- 3. 是哪家企业？（营业执照，单位登记证明等证件）
- 4. 您与该企业的关系是？（您是企业法人或被授权人，需提供企业委托授权书）
抄袭了我的内容
×
原文链接或出处
诽谤我
×
- 1. 您举报的内容以及侵犯了您什么权益？（请在邮件中列出您举报的内容、链接地址，并给出简短的说明）
- 2. 您是谁？（身份证明材料，可以是身份证或护照等证件）
对根叔社区有害的内容
×
不规范转载
×
举报说明
speed 1000 、 duplex full配上试试