h3c模拟器 SW31ping的通FW、R1和R2，但为什么pc就是ping不通FW

拓扑如下

FW 的配置：

#接口ip

[FW]interface GigabitEthernet 1/0/0 

[FW-GigabitEthernet1/0/0]ip address 10.1.1.1 24 

#接口加入 Trust区域

[FW]security-zone name Trust 

[FW-security-zone-Trust]import interface g1/0/0 

# 高级acl策略

[FW]acl advanced 3000 

[FW-acl-ipv4-adv-3000]rule 0 permit ip source any               

[FW-acl-ipv4-adv-3000]rule 1 permit icmp source any          

# 策略应用到各个区域

[FW]zone-pair security source trust destination local              

[FW-zone-pair-security-Trust-Local]packet-filter 3000 

[FW]zone-pair security source trust destination trust 

[FW-zone-pair-security-Trust-Trust]packet-filter 3000 

[FW]zone-pair security source trust destination untrust 

[FW-zone-pair-security-Trust-Untrust]packet-filter 3000 

SW31的配置：

#接口配置

[H3C-Vlan-interface20]interface g1/0/1 

[H3C-GigabitEthernet1/0/1]port link-mode route 

[H3C-GigabitEthernet1/0/1]ip address 10.1.1.2 24 

#vlan

[H3C]vlan 10 

[H3C]vlan 20 

[H3C]interface vlan 10 

[H3C-Vlan-interface10]ip address 192.168.10.254 24 

[H3C]interface vlan 20 

[H3C-Vlan-interface20]ip address 192.168.20.254 24 

#静态路由

[H3C]ip route-static 0.0.0.0 0 10.1.1.1    

其他的都不用管，就这个问题怎么弄啊，大佬们，再这样下去我头就秃了，┭┮﹏┭┮