F1000-E 升级后，直连管理端口G0/0，PING不通，哪位高手给解决下,十万火急

SecPath F1000-E ,升级后，直连管理端口G0/0，电脑接口192.168.0.2 ，PING不通，直连网线。

disp int g0/0 ,均显示 up

系统当前配置如下：

version 5.20, Release 3181P11 

 undo voice vlan mac-address 00e0-bb00-0000 

# domain default enable system # 

 undo alg dns undo alg rtsp undo alg h323 undo alg sip undo alg sqlnet undo alg pptp undo alg ils undo alg nbt undo alg msn undo alg qq undo alg tftp undo alg sccp undo alg gtp 

# session synchronization enable 

# password-recovery enable 

# vlan 1 

# domain system access-limit disable state active idle-cut disable self-service-url disable 

# pki domain default crl check disable # user-group system group-attribute allow-guest

 # local-user admin password cipher $c$3$jd88wWwhdnmUhw7ilL0Utk2Na8fkXQdM a

uthorization-attribute level 3 service-type telnet service-type web 

# interface Aux0 async mode flow link-protocol ppp

 # interface NULL0 

# interface GigabitEthernet0/0

 port link-mode route 

 ip address 192.168.0.1 255.255.255.0 

# interface GigabitEthernet0/1 

 port link-mode route

 # interface GigabitEthernet0/2 

 port link-mode route 

# interface GigabitEthernet0/3

 port link-mode route

 # vd Root id 1

 # zone name Management id 0 

 priority 100

 import interface GigabitEthernet0/0 

zone name Local id 1 

 priority 100 

zone name Trust id 2

 priority 85 

zone name DMZ id 3

 priority 50 

zone name Untrust id 4 

 priority 5 

switchto vd Root 

 zone name Management id 0

 ip virtual-reassembly

 zone name Local id 1

 ip virtual-reassembly 

 zone name Trust id 2

 ip virtual-reassembly 

 zone name DMZ id 3

 ip virtual-reassembly

 zone name Untrust id 4

 ip virtual-reassembly 

# load xml-configuration 

# user-interface con 0

 user-interface aux 0 

user-interface vty 0 4 

 authentication-mode scheme 

# return 

<H3C>