请问交换机堆叠的操作命令详细 堆叠原理

由于部分产品在场景上有差异或因硬件存在不同，最好是提供具体设备型号和软件版本方便查找对应文档。

另外框式设备需要特别注意主控也业务版规格。

因此建议参考S7500E系列交换机irf文档

https://www.h3c.com/cn/d_202001/1267639_30005_0.htm

您好，请知：

以下是IRF的配置命令，请参考：

1、1号设备关键配置如下：

[H3C]irf member 1 renumber 1     //将1号设备设定为成员1

Renumbering the member ID may result in configuration change or loss. Continue?[Y/N]:y

[H3C]int range Ten-GigabitEthernet 1/0/50 to Ten-GigabitEthernet 1/0/51

[H3C-if-range]shutdown

[H3C-if-range]quit

[H3C]irf-port 1/1  //将物理端口绑定到IRF端口

[H3C-irf-port1/1]port group interface Ten-GigabitEthernet 1/0/50

[H3C-irf-port1/1]port group interface Ten-GigabitEthernet 1/0/51

[H3C-irf-port1/1]quit

[H3C]int range Ten-GigabitEthernet 1/0/50 to Ten-GigabitEthernet 1/0/51

[H3C-if-range]undo shutdown

[H3C-if-range]quit

[H3C]irf-port-configuration active  //激活IRF

[H3C]save

2、2号设备关键配置点如下：

[H3C]irf member 1 renumber 2  //将2号设备设定为成员2

[H3C]int range Ten-GigabitEthernet 1/0/50 to Ten-GigabitEthernet 1/0/51

[H3C-if-range]shutdown

[H3C-if-range]quit

[H3C]irf-port 1/2  //将物理端口绑定到IRF端口

[H3C-irf-port1/2]port group interface Ten-GigabitEthernet 1/0/50

[H3C-irf-port1/2]port group interface Ten-GigabitEthernet 1/0/51

[H3C-irf-port1/2]quit

[H3C]int range Ten-GigabitEthernet 1/0/50 to Ten-GigabitEthernet 1/0/51

[H3C-if-range]undo shutdown

[H3C-if-range]quit

[H3C]irf-port-configuration active  //激活IRF

[H3C]save

3、分别将成员1设备、成员2设备重启

4、测试

<H3C>dis irf  //查看IRF的信息，看到成员1和成员2的设备信息都在一起

MemberID    Role    Priority  CPU-Mac         Description

 *+1        Master  1         30bd-490a-0104  ---

   2        Standby 1         30bd-525e-0204  ---

--------------------------------------------------

 * indicates the device is the master.

 + indicates the device through which the user logs in.

 The bridge MAC of the IRF is: 30bd-490a-0100

 Auto upgrade                : yes

 Mac persistent              : 6 min

 Domain ID                   : 0

<H3C>

<H3C>dis irf link  //查看成员1、成员2 IRF链路的状态均为UP

Member 1

 IRF Port  Interface                             Status

 1         Ten-GigabitEthernet1/0/50             UP

           Ten-GigabitEthernet1/0/51             UP

 2         disable                               --

Member 2

 IRF Port  Interface                             Status

 1         disable                               --

 2         Ten-GigabitEthernet2/0/50             UP

           Ten-GigabitEthernet2/0/51             UP

<H3C>

<H3C>dis irf configuration  //查看IRF的配置信息

 MemberID NewID    IRF-Port1                     IRF-Port2

 1        1        Ten-GigabitEthernet1/0/50     disable

                   Ten-GigabitEthernet1/0/51

 2        2        disable                       Ten-GigabitEthernet2/0/50

                                                 Ten-GigabitEthernet2/0/51

<H3C>

<H3C>dis irf topology  //查看IRF的拓扑信息

                              Topology Info

 -------------------------------------------------------------------------

               IRF-Port1                IRF-Port2

 MemberID    Link       neighbor      Link       neighbor    Belong To

 2           DIS        ---           UP         1           30bd-490a-0104

 1           UP         2             DIS        ---         30bd-490a-0104

<H3C>