在如图所示的交换网络中,三台交换机都只有缺省VLAN1,三台交换机的互联端口都为Trunk,且允许所有VLAN通过,三台交换机都开启了全局和端口的GVRP功能在交换机SWA上创建了VLAN10,在SWC上创建了 VLAN20,并且在交换机SWA上设置Ethemet1/0/1端口的GVRP注册模式为Fixed,在三台交换机査看各Trunk端口状态信息,下面显示正确的是 (选择一项或多项)
A. [SWA]display interface Ethernet 1/0/1
Ethernet1/0/1 current state: UP ......
PVID: 1
Mdi type: auto
Link delay is 0(sec)
Port link-type: trunk
VLAN passing: 1 (default vlan), 10,20
VLAN permitted: 1 (default vlan), 2-4094
Trunk port encapsulation: IEEE 802.1q
B. [SWB]display interface Ethernet 1/0/1
Ethernet 1/0/1 current state: UP
PVID: 1
Mdi type: auto
Link delay is 0(sec)
Port link-type: trunk
VLAN passing: 1 (default vlan), 10,20
VLAN permitted: 1 (default vlan), 2-4094
Trunk port encapsulation: IEEE 802.1q
C. [SWB]display interface Ethernet 1/0/2
Ethernet 1/0/2 current state: UP PVID: 1
Mdi type: auto
Link delay is 0(sec)
Port link-type: trunk
VLAN passing: 1 (default vlan), 10,20
VLAN permitted: 1 (default vlan), 2-4094
Trunk port encapsulation: IEEE 802.1q
D. [SWC]display interface Ethernet 1/0/1
Ethernet1/0/1 current state: UP
PVID: 1
Mdi type: auto
Link delay is 0(sec)
Port link-type: trunk
VLAN passing: 1 (default vlan), 10,20
VLAN permitted: 1 (default vlan), 2-4094
Trunk port encapsulation: IEEE 802.1q
Answer: D
为啥BC不对呢?A肯定不对的
(0)
GVRP是单向注册,在B上1口只有vlan10,2口只有vlan20,只有在C的vlan10上添加物理口,B的2口才有vlan10,由于A不学习动态,所以B的1口永远也学不到Vlan20
(0)
坐等大神解答
(0)
划水专业户??
划水专业户??
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
抄袭了我的内容
×
原文链接或出处
诽谤我
×
对根叔社区有害的内容
×
不规范转载
×
举报说明