最佳答案
display interface显示结果有个百分比,加粗部分即是。看那个参数就可以:
<H3C>dis interface GigabitEthernet1/0/1 current state: UP IP Packet Frame Type: PKTFMT_ETHNT_2, Hardware Address: 7425-8a05-8c0f Description: GigabitEthernet1/0/1 Interface Loopback is not set Media type is twisted pair Port hardware type is 1000_BASE_T 1000Mbps-speed mode, full-duplex mode Link speed type is autonegotiation, link duplex type is autonegotiation Flow-control is not enabled The Maximum Frame Length is 9216 Broadcast MAX-ratio: 100% Unicast MAX-ratio: 100% Multicast MAX-ratio: 100% Allow jumbo frame to pass PVID: 101 Mdi type: auto Port link-type: trunk VLAN passing : 1(default vlan), 101-3501, 3503, 4094 VLAN permitted: 1(default vlan), 2-4094 Trunk port encapsulation: IEEE 802.1q Port priority: 0 Last clearing of counters: Never Peak value of input: 89 bytes/sec, at 2000-07-11 10:38:42 Peak value of output: 7668 bytes/sec, at 2000-07-12 05:26:58 Last 300 seconds input: 0 packets/sec 84 bytes/sec 0% Last 300 seconds output: 114 packets/sec 7361 bytes/sec 0% Input (total): 129292 packets, 45278058 bytes 0 unicasts, 79431 broadcasts, 49861 multicasts, 0 pauses Input (normal): 129292 packets, - bytes 0 unicasts, 79431 broadcasts, 49861 multicasts, 0 pauses Input: 0 input errors, 0 runts, 0 giants, 0 throttles 0 CRC, 0 frame, - overruns, 0 aborts - ignored, - parity errors Output (total): 66930144 packets, 4300293009 bytes 0 unicasts, 29414 broadcasts, 66900730 multicasts, 0 pauses Output (normal): 66930144 packets, - bytes 0 unicasts, 29414 broadcasts, 66900730 multicasts, 0 pauses Output: 0 output errors, - underruns, - buffer failures 0 aborts, 0 deferred, 0 collisions, 0 late collisions 0 lost carrier, - no carrier
(0)
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
抄袭了我的内容
×
原文链接或出处
诽谤我
×
对根叔社区有害的内容
×
不规范转载
×
举报说明
暂无评论