无线路由器 msr 36-40

[XZZX-ROUTE]dis cur # version 7.1.059, Release 0304P15 # sysname XZZX-ROUTE # telnet server enable # port-security enable # ip unreachables enable ip ttl-expires enable # dns server 218.2.135.1 # password-recovery enable # vlan 1 # traffic classifier QOS_xingzhi operator and if-match acl 3000 # traffic behavior QOS_xingzhi queue af bandwidth 10240 # qos policy QOS_xingzhi classifier QOS_xingzhi behavior QOS_xingzhi # policy-based-route outbound permit node 10 if-match acl 2000 apply next-hop 112.4.150.65 # controller Cellular0/0 # controller Cellular0/1 # interface Aux0 # interface NULL0 # interface GigabitEthernet0/0 port link-mode route combo enable copper ip address 192.168.30.254 255.255.255.0 nat hairpin enable ip policy-based-route outbound # interface GigabitEthernet0/1 port link-mode route combo enable fiber ip address 10.247.65.254 255.255.255.0 nat outbound # interface GigabitEthernet0/2 port link-mode route ip address 112.4.150.81 255.255.255.192 nat outbound nat server protocol tcp global current-interface 443 inside 192.168.25.20 443 nat server protocol tcp global current-interface 3389 inside 192.168.25.20 3389 # scheduler logfile size 16 # line class aux user-role network-admin # line class tty user-role network-operator # line class vty user-role network-operator # line aux 0 user-role network-admin # line vty 0 4 authentication-mode scheme user-role level-15 protocol inbound telnet # line vty 5 63 user-role network-operator # ip route-static 0.0.0.0 0 10.247.65.254 ip route-static 10.10.10.0 24 192.168.30.1 ip route-static 192.168.0.0 24 192.168.30.1 ip route-static 192.168.2.0 24 192.168.30.1 ip route-static 192.168.3.0 24 192.168.30.1 ip route-static 192.168.4.0 24 192.168.30.1 ip route-static 192.168.6.0 24 192.168.30.1 ip route-static 192.168.7.0 24 192.168.30.1 ip route-static 192.168.8.0 24 192.168.30.1 ip route-static 192.168.9.0 24 192.168.30.1 ip route-static 192.168.10.0 24 192.168.30.1 ip route-static 192.168.11.0 24 192.168.30.1 ip route-static 192.168.12.0 22 192.168.30.1 ip route-static 192.168.16.0 24 192.168.30.1 ip route-static 192.168.17.0 24 192.168.30.1 ip route-static 192.168.18.0 24 192.168.30.1 ip route-static 192.168.19.0 24 192.168.30.1 ip route-static 192.168.20.0 24 192.168.30.1 ip route-static 192.168.21.0 24 192.168.30.1 ip route-static 192.168.22.0 24 192.168.30.1 ip route-static 192.168.23.0 24 192.168.30.1 ip route-static 192.168.24.0 24 192.168.30.1 ip route-static 192.168.25.0 24 192.168.30.1 ip route-static 192.168.30.0 24 192.168.30.1 ip route-static 192.168.100.0 24 192.168.30.1 # undo info-center enable # ssh server enable sftp server enable # acl basic 2000 description out_YiDong rule 0 permit source 192.168.8.0 0.0.0.255 rule 5 permit source 192.168.9.0 0.0.0.255 rule 10 permit source 192.168.10.0 0.0.0.255 rule 15 permit source 192.168.30.0 0.0.0.255 rule 20 permit source 192.168.11.0 0.0.0.255 # acl advanced 3000 rule 0 permit ip source 192.168.2.2 0 destination 192.168.2.254 0 rule 1 permit ip source 192.168.3.2 0 destination 192.168.3.254 0 rule 2 permit ip source 192.168.9.240 0 destination 192.168.9.250 0 rule 3 permit ip source 192.168.25.2 0 destination 192.168.25.254 0 # domain system # domain default enable system # role name level-0 description Predefined level-0 role # role name level-1 description Predefined level-1 role # role name level-2 description Predefined level-2 role # role name level-3 description Predefined level-3 role # role name level-4 description Predefined level-4 role # role name level-5 description Predefined level-5 role # role name level-6 description Predefined level-6 role # role name level-7 description Predefined level-7 role # role name level-8 description Predefined level-8 role # role name level-9 description Predefined level-9 role # role name level-10 description Predefined level-10 role # role name level-11 description Predefined level-11 role # role name level-12 description Predefined level-12 role # role name level-13 description Predefined level-13 role # role name level-14 description Predefined level-14 role # user-group system # local-user admin class manage password hash $h$6$iJLLmhUfHj+GAJoz$nIeTdahJCOzvV7hXEo4qngo1OPp+CQ/Cv30pzGdMwlDercVMicMtBkYnrk9dk+djGCDf51hhMbhtSk/C9Rp5PA== service-type telnet authorization-attribute user-role level-15 authorization-attribute user-role network-admin # return [XZZX-ROUTE] [XZZX-ROUTE] [XZZX-ROUTE] [XZZX-ROUTE]dis cur # version 7.1.059, Release 0304P15 # sysname XZZX-ROUTE # telnet server enable # port-security enable # ip unreachables enable ip ttl-expires enable # dns server 218.2.135.1 # password-recovery enable # vlan 1 # traffic classifier QOS_xingzhi operator and if-match acl 3000 # traffic behavior QOS_xingzhi queue af bandwidth 10240 # qos policy QOS_xingzhi classifier QOS_xingzhi behavior QOS_xingzhi # policy-based-route outbound permit node 10 if-match acl 2000 apply next-hop 112.4.150.65 # controller Cellular0/0 # controller Cellular0/1 # interface Aux0 # interface NULL0 # interface GigabitEthernet0/0 port link-mode route combo enable copper ip address 192.168.30.254 255.255.255.0 nat hairpin enable ip policy-based-route outbound # interface GigabitEthernet0/1 port link-mode route combo enable fiber ip address 10.247.65.254 255.255.255.0 nat outbound # interface GigabitEthernet0/2 port link-mode route ip address 112.4.150.81 255.255.255.192 nat outbound nat server protocol tcp global current-interface 443 inside 192.168.25.20 443 nat server protocol tcp global current-interface 3389 inside 192.168.25.20 3389 # scheduler logfile size 16 # line class aux user-role network-admin # line class tty user-role network-operator # line class vty user-role network-operator # line aux 0 user-role network-admin # line vty 0 4 authentication-mode scheme user-role level-15 protocol inbound telnet # line vty 5 63 user-role network-operator # ip route-static 0.0.0.0 0 10.247.65.254 ip route-static 10.10.10.0 24 192.168.30.1 ip route-static 192.168.0.0 24 192.168.30.1 ip route-static 192.168.2.0 24 192.168.30.1 ip route-static 192.168.3.0 24 192.168.30.1 ip route-static 192.168.4.0 24 192.168.30.1 ip route-static 192.168.6.0 24 192.168.30.1 ip route-static 192.168.7.0 24 192.168.30.1 ip route-static 192.168.8.0 24 192.168.30.1 ip route-static 192.168.9.0 24 192.168.30.1 ip route-static 192.168.10.0 24 192.168.30.1 ip route-static 192.168.11.0 24 192.168.30.1 ip route-static 192.168.12.0 22 192.168.30.1 ip route-static 192.168.16.0 24 192.168.30.1 ip route-static 192.168.17.0 24 192.168.30.1 ip route-static 192.168.18.0 24 192.168.30.1 ip route-static 192.168.19.0 24 192.168.30.1 ip route-static 192.168.20.0 24 192.168.30.1 ip route-static 192.168.21.0 24 192.168.30.1 ip route-static 192.168.22.0 24 192.168.30.1 ip route-static 192.168.23.0 24 192.168.30.1 ip route-static 192.168.24.0 24 192.168.30.1 ip route-static 192.168.25.0 24 192.168.30.1 ip route-static 192.168.30.0 24 192.168.30.1 ip route-static 192.168.100.0 24 192.168.30.1 # undo info-center enable # ssh server enable sftp server enable # acl basic 2000 description out_YiDong rule 0 permit source 192.168.8.0 0.0.0.255 rule 5 permit source 192.168.9.0 0.0.0.255 rule 10 permit source 192.168.10.0 0.0.0.255 rule 15 permit source 192.168.30.0 0.0.0.255 rule 20 permit source 192.168.11.0 0.0.0.255 # acl advanced 3000 rule 0 permit ip source 192.168.2.2 0 destination 192.168.2.254 0 rule 1 permit ip source 192.168.3.2 0 destination 192.168.3.254 0 rule 2 permit ip source 192.168.9.240 0 destination 192.168.9.250 0 rule 3 permit ip source 192.168.25.2 0 destination 192.168.25.254 0 # domain system # domain default enable system # role name level-0 description Predefined level-0 role # role name level-1 description Predefined level-1 role # role name level-2 description Predefined level-2 role # role name level-3 description Predefined level-3 role # role name level-4 description Predefined level-4 role # role name level-5 description Predefined level-5 role # role name level-6 description Predefined level-6 role # role name level-7 description Predefined level-7 role # role name level-8 description Predefined level-8 role # role name level-9 description Predefined level-9 role # role name level-10 description Predefined level-10 role # role name level-11 description Predefined level-11 role # role name level-12 description Predefined level-12 role # role name level-13 description Predefined level-13 role # role name level-14 description Predefined level-14 role # user-group system # local-user admin class manage password hash $h$6$iJLLmhUfHj+GAJoz$nIeTdahJCOzvV7hXEo4qngo1OPp+CQ/Cv30pzGdMwlDercVMicMtBkYnrk9dk+djGCDf51hhMbhtSk/C9Rp5PA== service-type telnet authorization-attribute user-role level-15 authorization-attribute user-role network-admin # return 

请问哪位大侠知道，我这个G0/1的地址是用来上网，请问一下，我的配置哪里有问题？比如外网域配置有没有问题

请问哪位大侠知道，我这个G0/1的地址是用来上网，请问一下，我的配置哪里有问题？比如外网域配置有没有问题