现在有两台7503交换机,分别配置vrrp,
帮检查一下VRRP配置有问题没有,使用的路由配置正确吗。谢 谢
# version 5.20, Release 6701P01 # sysname SW1 # irf priority 0 # domain default enable system # telnet server enable # ip ttl-expires enable ip unreachables enable # dldp enable # lldp enable # loopback-detection interval-time 300 # switch-mode standard switch-mode normal slot 1 # # vlan 1 # vlan 11 # domain system access-limit disable state active idle-cut disable self-service-url disable # dhcp server ip-pool vlan11 network 172.16.1.0 mask 255.255.255.0 gateway-list 172.16.1.254 # user-group system group-attribute allow-guest # stp region-configuration region-name stp1 instance 1 vlan 12 14 16 18 20 22 active region-configuration # stp instance 0 root primary stp instance 1 root secondary stp enable # interface Vlan-interface11 ip address 172.16.1.253 255.255.255.0 vrrp vrid 11 virtual-ip 172.16.1.254 vrrp vrid 11 priority 200 # interface GigabitEthernet0/0/25 port link-mode route ip address 172.16.253.1 255.255.255.252 # interface GigabitEthernet1/0/1 port link-mode bridge port link-type trunk port trunk permit vlan 1 to 24 dldp enable # ospf 1 silent-interface all undo silent-interface GigabitEthernet0/0/25 area 0.0.0.0 network 172.16.0.0 0.0.127.255 network 172.16.253.0 0.0.0.3 # dhcp server forbidden-ip 172.16.1.1 172.16.1.128 # dhcp enable
(0)
最佳答案
路由配置正常吗,另外2台交换机所配置的网段是DHCP该如何确定呢,是各一半吗、不参加自动分配,比如SW1是dhcp server forbidden-ip 172.16.1.1 172.16.1.128 那么SW2应该是
dhcp server forbidden-ip 172.16.1.129 172.16.1.254吗
ospf 1
silent-interface all
undo silent-interface GigabitEthernet0/0/25
area 0.0.0.0
network 172.16.0.0 0.0.127.255
network 172.16.253.0 0.0.0.3
(0)
暂无评论
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
抄袭了我的内容
×
原文链接或出处
诽谤我
×
对根叔社区有害的内容
×
不规范转载
×
举报说明
暂无评论