问题描述：
Ping 112.50.255.13 (112.50.255.13): 56 data bytes, press CTRL_C to break
*Feb 23 15:09:03:345 2021 H3C_F1070 IPFW/7/IPFW_PACKET: -COntext=1-Slot=2; Receiving, interface = Route-Aggregation1 version = 4, headlen = 20, tos = 0 pktlen = 84, pktid = 45283, offset = 0, ttl = 255, protocol = 1 checksum = 11332, s = 112.50.255.13, d = 112.50.255.14 channelID = 0, vpn-InstanceIn = 0, vpn-InstanceOut = 0. prompt: Receiving IP packet from interface Route-Aggregation1. Payload: ICMP type = 0, code = 0, checksum = 0x5808.
*Feb 23 15:09:03:346 2021 H3C_F1070 IPFW/7/IPFW_PACKET: -COntext=1-Slot=2; Delivering, interface = Route-Aggregation1 version = 4, headlen = 20, tos = 0 pktlen = 84, pktid = 45283, offset = 0, ttl = 255, protocol = 1 checksum = 11332, s = 112.50.255.13, d = 112.50.255.14 channelID = 0, vpn-InstanceIn = 0, vpn-InstanceOut = 0. prompt: Forwarding IP packet to upper layer. Payload: ICMP type = 0, code = 0, checksum = 0x5808. Request time out
*Feb 23 15:09:05:546 2021 H3C_F1070 IPFW/7/IPFW_PACKET: -COntext=1-Slot=2; Receiving, interface = Route-Aggregation1 version = 4, headlen = 20, tos = 0 pktlen = 84, pktid = 45286, offset = 0, ttl = 255, protocol = 1 checksum = 11329, s = 112.50.255.13, d = 112.50.255.14 channelID = 0, vpn-InstanceIn = 0, vpn-InstanceOut = 0. prompt: Receiving IP packet from interface Route-Aggregation1. Payload: ICMP type = 0, code = 0, checksum = 0x485f.
*Feb 23 15:09:05:546 2021 H3C_F1070 IPFW/7/IPFW_PACKET: -COntext=1-Slot=2; Delivering, interface = Route-Aggregation1 version = 4, headlen = 20, tos = 0 pktlen = 84, pktid = 45286, offset = 0, ttl = 255, protocol = 1 checksum = 11329, s = 112.50.255.13, d = 112.50.255.14 channelID = 0, vpn-InstanceIn = 0, vpn-InstanceOut = 0. prompt: Forwarding IP packet to upper layer. Payload: ICMP type = 0, code = 0, checksum = 0x485f.
组网及组网描述：
还是ping不通对端，这是启用了debugging后打印出来的信息，其余的问题描述在这个网址后：https://zhiliao.h3c.com/questions/dispcont/115764。
哪位大佬给看看，谢谢了！！
- 2021-02-23提问
- 举报
-
(0)
你这是直连都不通啊。
你可以把这个地址配置到电脑上，确定直连能否ping通。通了就是防火墙的配置有问题、如果不同，检查下对面地址是否正常，检查线路，你先要确保直连能通
- 2021-02-23回答
- 评论(5)
- 举报
-
(0)
我看你下面的接口有描述，是不是你先配置的聚合组，才配置的接口，如果是这样，步骤反了，配置是先将接口加入聚合组，然后在聚合口配置
重新再配置一下聚合组：
interface Route-Aggregation1
ip address 112.50.255.14 255.255.255.252
link-aggregation mode dynamic
nat outbound
- 2021-02-23回答
- 评论(3)
- 举报
-
(0)
先int route1 ，然后再敲int range 进入接口视图把他们加到聚合组,，然后再interface Route-Aggregation1 ip address 112.50.255.14 255.255.255.252 link-aggregation mode dynamic nat outbound
编辑答案
亲~登录后才可以操作哦!
确定你的邮箱还未认证，请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
- 1. 您举报的内容是什么？（请在邮件中列出您举报的内容和链接地址）
- 2. 您是谁？（身份证明材料，可以是身份证或护照等证件）
- 3. 是哪家企业？（营业执照，单位登记证明等证件）
- 4. 您与该企业的关系是？（您是企业法人或被授权人，需提供企业委托授权书）
抄袭了我的内容
×
原文链接或出处
诽谤我
×
- 1. 您举报的内容以及侵犯了您什么权益？（请在邮件中列出您举报的内容、链接地址，并给出简短的说明）
- 2. 您是谁？（身份证明材料，可以是身份证或护照等证件）
对根叔社区有害的内容
×
不规范转载
×
举报说明
那你这问题有点奇怪，可以联系下400，看下400怎么说。4008100504