升级

1、首先他必须是云AP

2、升级过程和瘦转胖是差不多的。

本手册适用于如下产品：比如WA4320H-SI、WAP711H、WAP712H、WAP712C-LI、WA4320H等WA4300系列云AP。该系列对应的具体型号能否支持胖瘦切换，可在新华三官网的“产品支持与服务>文档中心”中确认。。

1.1.1  AP瘦切胖配置案例（Bootrom）

操作风险提示：AP瘦切胖有风险，操作不当或者意外断电会导致设备故障，操作需谨慎。命令行升级需在PC上搭建TFTP Server（推荐用户使用3CDaemon搭建TFTP服务器）

将软件版本下载到设备FLASH内，然后通过命令行加载Bootrom版本，再加载主机软件版本，加载时输入的文件名一定要一致，建议复制黏贴，然后升级过程中避免断电重启操作。

1、先从官网下载WA4300云AP的胖版本，本案例以WA4320H-SI举例

https://www.h3c.com/cn/d_201909/1225207_30005_40.htm

下载压缩包WA4300S-WPT330-E1105-OASIS.zip，解压生成bin文件，把从官网下载的云AP版本文件改成wa4300s-oasis.bin，放到电脑桌面上。

2、电脑通过网线连接到ap的一个网口，电脑网卡设置为：192.168.0.1 255.255.255.0，如下例子打开TFTP服务器，把bin软件版本放到电脑桌面上，TFTP服务器目录指向电脑桌面，然后点击确定。

3、console口上传版本，console口登录方法参考《1.03 设备管理-Console登录方法》

在AP重启的时候按住不停地按Ctrl+B进入设备的bootroom菜单。

Enter your choice(0-9): ystem is starting...

Press Ctrl+D to access BASIC-BOOTWARE MENU

Booting Normal Extend BootWare....

The Extend BootWare is self-decompressing.........................Done!

****************************************************************************

*                                                                          *

*                 H3C WA4320H-SI BootWare, Version 1.07                    *

*                                                                          *

****************************************************************************

Copyright (c) 2004-2017 New H3C Technologies Co., Ltd.

Compiled Date       : Jun 19 2017

CPU Type            : ATHEROS AR9531

CPU L1 Cache        : 32KB

CPU Clock Speed     : 650MHz

Memory Type         : SDRAM

Memory Size         : 128MB

Memory Speed        : 450MHz

BootWare Size       : 512KB

Flash Size          : 16MB

PCB Version         : Ver.A

BootWare Validating...

Press Ctrl+B to enter extended boot menu...

BootWare password: Not required. Please press Enter to continue.

Password recovery capability is enabled.

Note: The current operating device is flash

Enter < Storage Device Operation > to select device.

3.1、升级扩展bootrom版本

要求扩展boot必须为7.13。版本文件中可获取.如果当前版本已经为7.13，直接忽略此步骤。

======================================================

|<1> Boot System                                                           |

|<2> Enter Serial SubMenu                                                  |

|<3> Enter Ethernet SubMenu                                                |

|<4> File Control                                                          |

|<5> Restore to Factory Default Configuration                              |

|<6> Skip Current System Configuration                                     |

|<7> BootWare Operation Menu                                               |

|<8> Clear Super Password                                                  |

|<9> Storage Device Operation                                              |

|<0> Reboot                                                                |

============================================================================

Ctrl+C: Display Copyright

Ctrl+F: Format File System

Enter your choice(0-9): 7  //进入bootware子菜单

===================================================

|Note:the operating device is flash                                        |

|<1> Update BootWare By Serial                                             |

|<2> Update BootWare By Ethernet                                           |

|<0> Exit To Main Menu                                                     |

============================================================================

Enter your choice(0-2): 2   //设置更新bootware方式通过网线

======================================

|<1> Update Full BootWare                                                  |

|<2> Update Extend BootWare                                                |

|<3> Update Basic BootWare                                                 |

|<4> Modify Ethernet Parameter                                             |

|<0> Exit To Main Menu                                                     |

============================================================================

Enter your choice(0-4): 4  //修改以太口参数

====================================================

|Note:       "." = Clear field.                                            |

|            "-" = Go to previous field.                                   |

|          Ctrl+D = Quit.                                                  |

============================================================================

Protocol (FTP or TFTP) :tftp

Load File Name         :wap712h_art_v5.bin

                       :apwtu41039757_v7.13.btw   //bootware版本名称, 如boot版本已经是V7.13了，可忽略本步骤，继续升级bin版本

Target File Name       :wap712h_art_v5.bin

                       :apwtu41039757_v7.13.btw

Server IP Address      :192.168.1.251 192.168.0.1     //电脑ip地址

Local IP Address       :192.168.1.2 192.168.0.19     //配置和电脑同网段任意地址

Gateway IP Address     :0.0.0.0

======================================

|<1> Update Full BootWare                                                  |

|<2> Update Extend BootWare                                                |

|<3> Update Basic BootWare                                                 |

|<4> Modify Ethernet Parameter                                             |

|<0> Exit To Main Menu                                                     |

============================================================================

Enter your choice(0-4): 1   //更新bootware版本

Loading..........Done!

381952 bytes downloaded!

Updating Basic BootWare? [Y/N]Y     //手工输入“Y”

Updating Basic BootWare..........Done!

Updating Extend BootWare? [Y/N]Y    //手工输入“Y”

Updating Extend BootWare...........Done!

3.2、升级bin版本

升级完扩展boot之后重启设备（可以看到此时扩展boot已经是7.13版本），进扩展boot升级设备版本。

System is starting...

Press Ctrl+D to access BASIC-BOOTWARE MENU...

Booting Normal Extended BootWare

The Extended BootWare is self-decompressing..........................Done.

****************************************************************************

*                                                                          *

*                 H3C WA4320H-SI BootWare, Version 7.13                    *

*                                                                          *

****************************************************************************

Copyright (c) 2004-2019 New H3C Technologies Co., Ltd.

Compiled Date       : Jul 31 2019

CPU Type            : ATHEROS AR9531

CPU L1 Cache        : 32KB

CPU Clock Speed     : 650MHz

Memory Type         : SDRAM

Memory Size         : 128MB

Memory Speed        : 450MHz

BootWare Size       : 512KB

Flash Size          : 16MB

PCB Version         : Ver.A

BootWare Validating...

Press Ctrl+B to access EXTENDED-BOOTWARE MENU...

Password recovery capability is enabled.

Note: The current operating device is flash

Enter < Storage Device Operation > to select device.

上传版本文件

====================================================

|<1> Boot System                                                           |

|<2> Enter Serial SubMenu                                                  |

|<3> Enter Ethernet SubMenu                                                |

|<4> File Control                                                          |

|<5> Restore to Factory Default Configuration                              |

|<6> Skip Current System Configuration                                     |

|<7> BootWare Operation Menu                                               |

|<8> Skip Authentication for Console Login                                 |

|<9> Storage Device Operation                                              |

|<0> Reboot                                                                |

============================================================================

Ctrl+Z: Access EXTENDED ASSISTANT MENU

Ctrl+F: Format File System

Ctrl+Y: Change AP Mode

Enter your choice(0-9): 3    //进入以太口子菜单

====================================================

|Note:the operating device is flash                                        |

|<1> Download Image Program To SDRAM And Run                               |

|<2> Update Main Image File                                                |

|<3> Download Files(*.*)                                                   |

|<4> Modify Ethernet Parameter                                             |

|<0> Exit To Main Menu                                                     |

|                    |

============================================================================

Enter your choice(0-4): 4    //修改以太口参数

====================================================

|Note:       "." = Clear field.                                            |

|            "-" = Go to previous field.                                   |

|         Ctrl+D = Quit.                                                   |

============================================================================

Protocol (FTP or TFTP) :tftp

Load File Name         :apwtu41039757_v7.13.btw

                       :wa4300s-oasis.bin    //此处注意修改版本文件名称,为wa4300s-oasis.bin

Target File Name       :apwtu41039757_v7.13.btw

                       :wa4300s-oasis.bin   //此处注意修改版本文件名称,为wa4300s-oasis.bin

Server IP Address      :192.168.0.1         //电脑ip地址

Local IP Address       :192.168.0.19       //配置和电脑同网段任意地址

Subnet Mask            :0.0.0.0

Gateway IP Address     :0.0.0.0

====================================================

|Note:the operating device is flash                                        |

|<1> Download Image Program To SDRAM And Run                               |

|<2> Update Main Image File                                                |

|<3> Download Files(*.*)                                                   |

|<4> Modify Ethernet Parameter                                             |

|<0> Exit To Main Menu                                                     |

|                    |

============================================================================

Enter your choice(0-4): 3    //更新版本

Loading.....................................................................

............................................................................

............................................................................

.................................................Done.

13698048 bytes downloaded!

Saving file flash:/wa4300s-oasis.bin .......................................

............................................................................

............................................................................

............................................................................

...........................................................Done.

切换ap模式

====================================================

|Note:the operating device is flash                                        |

|<1> Download Image Program To SDRAM And Run                               |

|<2> Update Main Image File                                                |

|<3> Download Files(*.*)                                                   |

|<4> Modify Ethernet Parameter                                             |

|<0> Exit To Main Menu                                                     |

|                    |

============================================================================

Enter your choice(0-4): 0

====================================================

|<1> Boot System                                                           |

|<2> Enter Serial SubMenu                                                  |

|<3> Enter Ethernet SubMenu                                                |

|<4> File Control                                                          |

|<5> Restore to Factory Default Configuration                              |

|<6> Skip Current System Configuration                                     |

|<7> BootWare Operation Menu                                               |

|<8> Skip Authentication for Console Login                                 |

|<9> Storage Device Operation                                              |

|<0> Reboot                                                                |

============================================================================

Ctrl+Z: Access EXTENDED ASSISTANT MENU

Ctrl+F: Format File System

Ctrl+Y: Change AP Mode

Enter your choice(0-9):

Please select the new mode

Current mode is Fit

============================================================================

|NO.  Mode                                                                 |

|1    Oasis Mode                                                           |

|2    Fit   Mode                                                           |

|0    Exit                                                                 |

============================================================================

Enter your choice(0-2):1   //切换为云模式

This operation takes several minutes.Please wait...

Changed to Oasis mode successfully! Please reboot the system now!

切换完成后重启设备

====================================================

|<1> Boot System                                                           |

|<2> Enter Serial SubMenu                                                  |

|<3> Enter Ethernet SubMenu                                                |

|<4> File Control                                                          |

|<5> Restore to Factory Default Configuration                              |

|<6> Skip Current System Configuration                                     |

|<7> BootWare Operation Menu                                               |

|<8> Skip Authentication for Console Login                                 |

|<9> Storage Device Operation                                              |

|<0> Reboot                                                                |

============================================================================

Ctrl+Z: Access EXTENDED ASSISTANT MENU

Ctrl+F: Format File System

Ctrl+Y: Change AP Mode

Enter your choice(0-9): 0    //重启

System is starting...

Press Ctrl+D to access BASIC-BOOTWARE MENU...

Booting Normal Extended BootWare

The Extended BootWare is self-decompressing..........................Done.

****************************************************************************

*                                                                          *

*                 H3C WA4320H-SI BootWare, Version 7.13                    *

*                                                                          *

****************************************************************************

Copyright (c) 2004-2019 New H3C Technologies Co., Ltd.

Compiled Date       : Jul 31 2019

CPU Type            : ATHEROS AR9531

CPU L1 Cache        : 32KB

CPU Clock Speed     : 650MHz

Memory Type         : SDRAM

Memory Size         : 128MB

Memory Speed        : 450MHz

BootWare Size       : 512KB

Flash Size          : 16MB

PCB Version         : Ver.A

BootWare Validating...

Press Ctrl+B to access EXTENDED-BOOTWARE MENU...

starting...

配置关键点：

1、第三步选择Download Files，否则会出现报错；

2、需要上传版本文件之后再切换ap模式；

3、刷完版本之后只能通过web管理；

4、云ap里，只有WAP712C-LI  型号，是要用7.17的boot的, 该版本适配的其他款型均用7.13的boot；

5、严格按照案例中操作步骤执行，关键注意先上传版本文件之后再切换ap模式；

6、把从官网下载的云AP版本文件改成wa4300s-oasis.bin；

7、操作完成后设备启动会停留在starting…阶段，实际可能已经完成，如果能搜索到SSID为H3C_XXXXXX（mac后6位）的SSID说明已经转换完成并启动。

云AP是Fat AP。初次使用云AP，给云AP上电后，云AP会默认开启4个无线服务：

l   其中一个称之为管理WIFI，也称内部WIFI，SSID为H3C_XXXXXX，XXXXXX为设备mac地址后六位。管理WIFI供商铺内部员工管理使用，一般在2.4G频段工作，当设备未连接到绿洲时，通过连接管理WIFI在浏览器输入10.40.94.1或myap.h3c.com访问本地web页面可进行本设备下的无线服务管理配置，一旦连接上绿洲，将只能通过绿洲平台进行统一的无线服务配置管理。

l   其余3个称为用户WIFI，也称商业WIFI，SSID为H3C_WiFi_1、H3C_WiFi_2、H3C_WiFi_3，不加密，不认证，不隐藏。当设备连接到外网，可为已经连接上用户WIFI的用户提供上网服务。