如拓朴图所示,一个教育的城域网
调试好之后,无线终端的网关会发生随机切换
有时AP1下的设备,获取的地址池是AP2分配的
或者获取的就是192的地址
本人新手
有大神出手帮分析一下么
附配置
#
version 7.1.064, Release 2433P01
#
sysname H3C
#
clock timezone Beijing add 08:00:00
#
wlan global-configuration
#
telnet server enable
#
port-security enable
#
dhcp enable
#
dns proxy enable
#
lldp global enable
lldp hold-multiplier 8
#
password-recovery enable
#
vlan 1
#
dhcp server ip-pool wlan
gateway-list 10.68.7.254
network 10.68.7.0 mask 255.255.255.0
address range 10.68.7.52 10.68.7.101
dns-list 114.114.114.114
expired unlimited
#
wlan service-template h3c-wlan
ssid XX小学-一四班
user-isolation enable
akm mode psk
preshared-key pass-phrase cipher $c$3$cp9MJOQaWL6KekFTB1sLLJY+ujnaB7K84VdHHsAw+Q==
cipher-suite ccmp
cipher-suite tkip
security-ie rsn
security-ie wpa
service-template enable
#
interface NULL0
#
interface Vlan-interface1
ip address 10.68.7.155 255.255.255.0
#
interface GigabitEthernet1/0/1
#
interface GigabitEthernet1/0/2
#
interface WLAN-Radio1/0/1
service-template h3c-wlan
#
interface WLAN-Radio1/0/2
service-template h3c-wlan
#
interface WLAN-Radio1/0/3
service-template h3c-wlan
#
scheduler logfile size 16
#
line class console
user-role network-admin
#
line class vty
user-role network-operator
#
line con 0
user-role network-admin
#
line vty 0 4
authentication-mode scheme
user-role network-admin
user-role network-operator
#
line vty 5 31
authentication-mode scheme
user-role network-operator
#
line vty 32 63
user-role network-operator
#
ssh server enable
#
ntp-service enable
ntp-service unicast-server ***.*** priority
ntp-service unicast-server ***.***
ntp-service unicast-server ***.***
ntp-service unicast-server ***.***
#
domain cloud
authentication portal none
authorization portal none
accounting portal none
#
domain system
#
domain default enable system
#
user-group system
#
local-user admin class manage
password hash $h$6$ulIi11kaTNoWgDOa$63ATOl9wpQL8rOGwnxBpfS3wefgyiXR5ln66kDJVkBboBzDd6TX1AD5eQDTKUOYOpRQvK+pIsMf5pAFcF28R/g==
service-type telnet http https
authorization-attribute user-role network-admin
#
local-user h3c class manage
password hash $h$6$jkKNgHgwQ9JAVsS5$USsNHf4dImrB/gA69rFAs2FqdIpioJDMM+fSo6ecDGh4UUSikuz5mFytU4FAlhhtcCoWpQJNxuCq3/sAD0iKJw==
service-type ssh telnet terminal http https
authorization-attribute user-role network-admin
authorization-attribute user-role network-operator
#
portal local-web-server http
#
portal local-web-server https
#
ip http enable
ip https enable
#
portal mac-trigger-server cloud
binding-retry 2 interval 3
cloud-binding enable
#
cloud-management server domain oasis.h3c.com
#
return
(0)
最佳答案
胖AP单独配置,就可以了
胖AP配置模板:
1,建立无线接口:
interface WLAN-BSS1
port-security port-mode psk
port-security tx-key-type 11key
port-security preshared-key pass-phrase s xxx
2,建立无线模板:
wlan service-template 1 crypto
ssid XXXX
cipher-suite ccmp
security-ie rsn
service-template enable
3,将无线模板和无线接口绑定到射频接口:
interface WLAN-Radio1/0/2
service-template 1 interface wlan-bss 1
(0)
这是因为你用的AP是FAT模式,AP间独立工作,而你的网卡发生了漫游,当连接AP1时,获取到的是AP1下的地址,当连接AP2时,获取到的是AP2的地址,解决方法:
1,将不通的ap设置成不同的SSID
2,配置无线控制器,将AP调成FIT模式,通过无线控制器实现漫游
(0)
暂无评论
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
抄袭了我的内容
×
原文链接或出处
诽谤我
×
对根叔社区有害的内容
×
不规范转载
×
举报说明
暂无评论