华三S5024PV5-EI 是否支持ipv6 上层核心互联S5024 怎么对接配置

您好，支持的，参考链接

http://www.h3c.com/cn/d_201904/1175256_30005_0.htm

1.13  IPv6基础典型配置举例

1.13.1  IPv6基本组网配置举例

1. 组网需求

·            如图1-6所示，Host、Router A和Router B之间通过以太网接口相连，在接口上配置IPv6地址，验证它们之间的互通性。

·            Router B有可以到Host的路由。

·            在Host上安装IPv6，根据IPv6邻居发现协议自动配置IPv6地址，有可以到Router B的路由。

2. 组网图

图1-6 IPv6地址配置组网图

‌

3. 配置步骤

(1)       配置Router A

# 手工指定接口GigabitEthernet1/0/1的全球单播地址。

<RouterA> system-view

[RouterA] interface gigabitethernet 1/0/1

[RouterA-GigabitEthernet1/0/1] ipv6 address 3001::1/64

[RouterA-GigabitEthernet1/0/1] quit

# 手工指定接口GigabitEthernet1/0/2的全球单播地址，并允许其发布RA消息。（缺省情况下，所有的接口不会发布RA消息）

[RouterA] interface gigabitethernet 1/0/2

[RouterA-GigabitEthernet1/0/2] ipv6 address 2001::1/64

[RouterA-GigabitEthernet1/0/2] undo ipv6 nd ra halt

[RouterA-GigabitEthernet1/0/2] quit

(2)       配置Router B

# 手工指定接口GigabitEthernet1/0/1的全球单播地址。

<RouterB> system-view

[RouterB] interface gigabitethernet 1/0/1

[RouterB-GigabitEthernet1/0/1] ipv6 address 3001::2/64

[RouterB-GigabitEthernet1/0/1] quit

# 配置IPv6静态路由，该路由的目的地址为2001::/64，下一跳地址为3001::1。

[RouterB] ipv6 route-static 2001:: 64 3001::1

(3)       配置Host

在Host上安装IPv6，根据IPv6邻居发现协议自动配置IPv6地址。

# 从Router A上查看接口GigabitEthernet1/0/2的邻居信息。

[RouterA] display ipv6 neighbors interface gigabitethernet 1/0/2

Type: S-Static    D-Dynamic    O-Openflow    R-Rule    I-Invalid

IPv6 address                  Link Layer     VID  Interface            State T Age

FE80::215:E9FF:FEA6:7D14       0015-e9a6-7d14 N/A  GE1/0/2                STALE D 1238

2001::15B:E0EA:3524:E791       0015-e9a6-7d14 N/A  GE1/0/2                STALE D 1248

通过上面的信息可以知道Host上获得的IPv6全球单播地址为2001::15B:E0EA:3524:E791。

4. 验证配置

# 显示Router A的接口信息，可以看到各接口配置的IPv6全球单播地址。

[RouterA] display ipv6 interface gigabitethernet 1/0/1

GigabitEthernet1/0/1 current state: UP

Line protocol current state: UP

IPv6 is enabled, link-local address is FE80::20F:E2FF:FE00:2

  Global unicast address(es):

    3001::1, subnet is 3001::/64

  Joined group address(es):

    FF02::1

    FF02::2

    FF02::1:FF00:1

    FF02::1:FF00:2

  MTU is 1500 bytes

  ND DAD is enabled, number of DAD attempts: 1

  ND reachable time is 30000 milliseconds

  ND retransmit interval is 1000 milliseconds

  Hosts use stateless autoconfig for addresses

IPv6 Packet statistics:

  InReceives:                    25829

  InTooShorts:                   0

  InTruncatedPkts:               0

  InHopLimitExceeds:             0

  InBadHeaders:                  0

  InBadOptions:                  0

  ReasmReqds:                    0

  ReasmOKs:                      0

  InFragDrops:                   0

  InFragTimeouts:                0

  OutFragFails:                  0

  InUnknownProtos:               0

  InDelivers:                    47

  OutRequests:                   89

  OutForwDatagrams:              48

  InNoRoutes:                    0

  InTooBigErrors:                0

  OutFragOKs:                    0

  OutFragCreates:                0

  InMcastPkts:                   6

  InMcastNotMembers:             25747

  OutMcastPkts:                  48

  InAddrErrors:                  0

  InDiscards:                    0

  OutDiscards:                   0

[RouterA] display ipv6 interface gigabitethernet 1/0/2

GigabitEthernet1/0/2 current state: UP

Line protocol current state: UP

IPv6 is enabled, link-local address is FE80::20F:E2FF:FE00:1C0

  Global unicast address(es):

    2001::1, subnet is 2001::/64

  Joined group address(es):

    FF02::1

    FF02::2

    FF02::1:FF00:1

    FF02::1:FF00:1C0

  MTU is 1500 bytes

  ND DAD is enabled, number of DAD attempts: 1

  ND reachable time is 30000 milliseconds

  ND retransmit interval is 1000 milliseconds

  ND advertised reachable time is 0 milliseconds

  ND advertised retransmit interval is 0 milliseconds

  ND router advertisements are sent every 600 seconds

  ND router advertisements live for 1800 seconds

  Hosts use stateless autoconfig for addresses

IPv6 Packet statistics:

  InReceives:                    272

  InTooShorts:                   0

  InTruncatedPkts:               0

  InHopLimitExceeds:             0

  InBadHeaders:                  0

  InBadOptions:                  0

  ReasmReqds:                    0

  ReasmOKs:                      0

  InFragDrops:                   0

  InFragTimeouts:                0

  OutFragFails:                  0

  InUnknownProtos:               0

  InDelivers:                    159

  OutRequests:                   1012

  OutForwDatagrams:              35

  InNoRoutes:                    0

  InTooBigErrors:                0

  OutFragOKs:                    0

  OutFragCreates:                0

  InMcastPkts:                   79

  InMcastNotMembers:             65

  OutMcastPkts:                  938

  InAddrErrors:                  0

  InDiscards:                    0

  OutDiscards:                   0

# 显示Router B的接口信息，可以看到接口配置的IPv6全球单播地址。

[RouterB] display ipv6 interface gigabitethernet 1/0/1

GigabitEthernet1/0/1 current state: UP

Line protocol current state: UP

IPv6 is enabled, link-local address is FE80::20F:E2FF:FE00:1234

  Global unicast address(es):

    3001::2, subnet is 3001::/64

  Joined group address(es):

    FF02::1

    FF02::2

    FF02::1:FF00:2

    FF02::1:FF00:1234

  MTU is 1500 bytes

  ND DAD is enabled, number of DAD attempts: 1

  ND reachable time is 30000 milliseconds

  ND retransmit interval is 1000 milliseconds

  Hosts use stateless autoconfig for addresses

IPv6 Packet statistics:

  InReceives:                    117

  InTooShorts:                   0

  InTruncatedPkts:               0

  InHopLimitExceeds:             0

  InBadHeaders:                  0

  InBadOptions:                  0

  ReasmReqds:                    0

  ReasmOKs:                      0

  InFragDrops:                   0

  InFragTimeouts:                0

  OutFragFails:                  0

  InUnknownProtos:               0

  InDelivers:                    117

  OutRequests:                   83

  OutForwDatagrams:              0

  InNoRoutes:                    0

  InTooBigErrors:                0

  OutFragOKs:                    0

  OutFragCreates:                0

  InMcastPkts:                   28

  InMcastNotMembers:             0

  OutMcastPkts:                  7

  InAddrErrors:                  0

  InDiscards:                    0

  OutDiscards:                   0

# 在Host上使用Ping测试和Router A及Router B的互通性；在Router B上使用Ping测试和Router A及Host的互通性。

[RouterB] ping ipv6 -c 1 3001::1

Ping6(56 data bytes) 3001::2 --> 3001::1, press CTRL_C to break

56 bytes from 3001::1, icmp_seq=0 hlim=64 time=4.404 ms

--- Ping6 statistics for 3001::1 ---

1 packet(s) transmitted, 1 packet(s) received, 0.0% packet loss

round-trip min/avg/max/std-dev = 4.404/4.404/4.404/0.000 ms

[RouterB] ping ipv6 -c 1 2001::15B:E0EA:3524:E791

Ping6(56 data bytes) 3001::2 --> 2001::15B:E0EA:3524:E791, press CTRL_C to break

56 bytes from 2001::15B:E0EA:3524:E791, icmp_seq=0 hlim=64 time=5.404 ms

--- Ping6 statistics for 2001::15B:E0EA:3524:E791 ---

1 packet(s) transmitted, 1 packet(s) received, 0.0% packet loss

round-trip min/avg/max/std-dev = 5.404/5.404/5.404/0.000 ms

从Host上也可以ping通Router B和Router A，证明它们是互通的。