ap

导入了 一直显示文件有问题

我有正确的版本 但是 一直显示文件有问题

上传失败。

那怎么办

1.1.2  AP瘦切胖配置案例（Bootrom） 1） 使用Console口登入到命令行，从官网下载WAP621的软件版本，将压缩包解压，将里面的文件名称修改为wa2600a_fat.bin。 2） 电脑网卡设置为：192.168.0.1 255.255.255.0，如下例子打开TFTP服务器，把软件版本WA2600a_fat.bin放到电脑桌面上，TFTP服务器目录指向电脑桌面，然后点击确定。  3） 在AP重启的时候按住Ctrl+B进入设备的bootroom菜单，以下标黑部分为设备自动打印部分，标红加粗的命令是需要手动输入。 ======================================== |<1> Boot System |<2> Enter Serial SubMenu |<3> Enter Ethernet SubMenu |<4> File Control |<5> Restore to Factory Default Configuration |<6> Skip Current System Configuration |<7> BootWare Operation Menu |<8> Clear Super Password |<9> Storage Device Operation |<0> Reboot =============================================================== Ctrl+C: Display Copyright Ctrl+F: Format File System Enter your choice(0-9): Ctrl+F y Enter your choice(0-9): 3（此处输入） ========================================== |Note:the operating device is flash |<1> Download Application Program To SDRAM And Run |<2> Update Main Application File |<3> Update Backup Application File |<4> Update Secure Application File |<5> Modify Ethernet Parameter |<0> Exit To Main Menu |                    ============================================================= 4） 进入修改以太网参数菜单，使用TFTP网络协议传输wa2600a_fat.bin到AP上 Enter your choice(0-5): 5 ================================ |Note:       '.' = Clear field. |            '-' = Go to previous field. |          Ctrl+D = Quit. =============================================================== Protocol (FTP or TFTP) : TFTP //忽略输出内容，直接输入TFTP，然后回车 Load File Name         :wa2600a_fat.bin //忽略输出内容，直接输入wa2600a_fat.bin，然后回车 Target File Name       :wa2600a_fat.bin   //忽略输出内容，直接输入wa2600a_fat.bin，然后回车 Server IP Address      :192.168.0.1    //忽略输出内容，直接输入电脑主机的 IP，比如192.168.0.1，然后回车 Local IP Address       :192.168.0.50 //忽略输出内容，直接输入和电脑主机的ip同一网段，比如192.168.0.50，然后回车 Gateway IP Address     :0.0.0.0 //忽略输出内容，直接回车 备注：注意给电脑手动配置一个与AP同网段的IP地址，保证电脑与AP路由可达   ======================================= |Note:the operating device is flash |<1> Download Application Program To SDRAM And |<2> Update Main Application File |<3> Update Backup Application File |<4> Update Secure Application File |<5> Modify Ethernet Parameter |<0> Exit To Main Menu |   ============================================================= Enter your choice(0-5): 2   //此时可以看到TFTP服务器上数据上传的滚动 Loading..................................................................... ....................................Done! 5） 返回主菜单，查看设备上是否真的已经上传了该软件版本 =========================================== |Note:the operating device is flash |<1> Download Application Program To SDRAM And R |<2> Update Main Application File |<3> Update Backup Application Fil |<4> Update Secure Application File |<5> Modify Ethernet Parameter ||<0> Exit To Main Menu |                    |================================================================= Enter your choice(0-5): 0 ========================================== <1> Boot System <2> Enter Serial SubMenu <3> Enter Ethernet SubMenu <4> File Control <5> Restore to Factory Default Configuration <6> Skip Current System Configuration <7> BootWare Operation Menu <8> Clear Super Password <9> Storage Device Operation <0>Reboot                                                                ========================================================== Ctrl+C: Display Copyright Ctrl+F: Format File System Enter your choice(0-9): 4 ==================================================== |Note:the operating device is flash <1> Display All File(s) <2> Set Application File type <3> Delete File <0> Exit To Main Menu ============================================================== Enter your choice(0-3): 1 Display all file(s) in flash: 'M' = MAIN      'B' = BACKUP      'S' = SECURE      'N/A' = NOT ASSIGNED   |NO. Size(B)   Time                 Type   Name                           ||1   9124864   Aug/08/2008 20:00:00 M      wa2600a_fat.bin                 ============================================================== 6） 返回主菜单，将设备进行重启 |Note:the operating device is flash <1> Display All File(s) <2> Set Application File type <3> Delete File <0> Exit To Main Menu ================================================================= Enter your choice(0-3): 0 ============================================= <1> Boot System <2> Enter Serial SubMenu <3> Enter Ethernet SubMenu <4> File Control <5> Restore to Factory Default Configuration <6> Skip Current System Configuration <7> BootWare Operation Menu <8> Clear Super Password <9> Storage Device Operation <0>Reboot                                                                ================================================================== Ctrl+C: Display Copyright Ctrl+F: Format File System Enter your choice(0-9): 0 System is starting...   7） 重启设备完成后就可以使用默认的管理地址192.168.0.50登录AP进行管理了。登录AP的默认用户名是admin，密码是h3capadmin。

版本我下了 倒进去 里面都没有显示 而且一直报文件有问题