[H3C]dis cur # version 7.1.070, Release 6126P10 # sysname H3C # irf mac-address persistent timer irf auto-update enable undo irf link-delay irf member 1 priority 1 # lldp global enable # password-recovery enable # vlan 1 # stp global enable # interface NULL0 # interface GigabitEthernet1/0/1 poe enable # interface GigabitEthernet1/0/2 poe enable # interface GigabitEthernet1/0/3 poe enable # interface GigabitEthernet1/0/4 poe enable # interface GigabitEthernet1/0/5 poe enable # interface GigabitEthernet1/0/6 poe enable # interface GigabitEthernet1/0/7 poe enable # interface GigabitEthernet1/0/8 poe enable # interface GigabitEthernet1/0/9 # interface GigabitEthernet1/0/10 # scheduler logfile size 16 # line class aux user-role network-admin # line class vty user-role network-operator # line aux 0 user-role network-admin # line vty 0 63 user-role network-operator # radius scheme system user-name-format without-domain # domain system # domain default enable system # role name level-0 description Predefined level-0 role # role name level-1 description Predefined level-1 role # role name level-2 description Predefined level-2 role # role name level-3 description Predefined level-3 role # role name level-4 description Predefined level-4 role # role name level-5 description Predefined level-5 role # role name level-6 description Predefined level-6 role # role name level-7 description Predefined level-7 role # role name level-8 description Predefined level-8 role # role name level-9 description Predefined level-9 role # role name level-10 description Predefined level-10 role # role name level-11 description Predefined level-11 role # role name level-12 description Predefined level-12 role # role name level-13 description Predefined level-13 role # role name level-14 description Predefined level-14 role # user-group system # return [H3C]dis int br [H3C]dis int brief Brief information on interfaces in route mode: Link: ADM - administratively down; Stby - standby Protocol: (s) - spoofing Interface Link Protocol Primary IP Description InLoop0 UP UP(s) -- NULL0 UP UP(s) -- Brief information on interfaces in bridge mode: Link: ADM - administratively down; Stby - standby Speed: (a) - auto Duplex: (a)/A - auto; H - half; F - full Type: A - access; T - trunk; H - hybrid Interface Link Speed Duplex Type PVID Description GE1/0/1 DOWN auto A A 1 GE1/0/2 DOWN auto A A 1 GE1/0/3 DOWN auto A A 1 GE1/0/4 DOWN auto A A 1 GE1/0/5 DOWN auto A A 1 GE1/0/6 DOWN auto A A 1 GE1/0/7 UP 1G(a) F(a) A 1 GE1/0/8 DOWN auto A A 1 GE1/0/9 UP 1G(a) F(a) A 1 GE1/0/10 DOWN auto A A 1 [H3C]dis poe int poe [H3C]dis poe int po [H3C]dis poe int power Interface Current Peak Max PD Description (W) (W) (W) GE1/0/1 0.0 0.0 30.0 GE1/0/2 0.0 0.0 30.0 GE1/0/3 0.0 0.0 30.0 GE1/0/4 0.0 0.0 30.0 GE1/0/5 0.0 0.0 30.0 GE1/0/6 0.0 0.0 30.0 GE1/0/7 0.0 0.0 30.0 GE1/0/8 0.0 0.0 30.0 --- On State Ports: 0; Used: 0.0(W); Remaining: 125.0(W) ---
poe端口不供电,不需要poe的设备可以正常使用网络。
(0)
您好,请知:
POE不供电,以下是排查要点,请参考:
1、检查物理端口的POE是否已enable
2、检查网线、水晶头是否问题,距离是否超过了100米。
3、检查总功率是否已超。
4、可考虑升级下交换机的软件版本到最新。
(0)
请问一下,poe的pse版本可以单独刷吗?
请问一下,poe的pse版本可以单独刷吗?
您好,看配置poe已经打开,所有端口都不供电,还是部分端口,部分端口就需要检查是否功率达到上限,如果是所有,可能是pse 固件丢失,建议通过400获取。
(0)
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
抄袭了我的内容
×
原文链接或出处
诽谤我
×
对根叔社区有害的内容
×
不规范转载
×
举报说明