H3C S5110-28P-PWR POE功能报错

<WFRM-ERBU-13F-POE-5110>dis poe interface

 Interface    Status   Priority CurPower Operating  IEEE   Detection

                                (W)      Status     Class  Status

 GE1/0/1      disabled low      0.0      unknown    0      fault

 GE1/0/2      disabled low      0.0      unknown    0      fault

 GE1/0/3      disabled low      0.0      unknown    0      fault

[WFRM-ERBU-13F-POE-5110-GigabitEthernet1/0/1]poe en

The operation is not successful.

<WFRM-ERBU-13F-POE-5110>dis poe device

 PSE ID  SlotNo SubSNo PortNum  MaxPower(W)  State  Model

 1       1      0      24       385          faulty LSW-BCM-POE

%Apr 26 12:00:43:206 2000 WFRM-ERBU-13F-POE-5110 POE/4/PSE_STATUS:

 PSE 1: Failed to upgrade PSE firmware and PSE will not operate correctly.

%Apr 26 20:00:45:276 2000 WFRM-ERBU-13F-POE-5110 MSTP/6/MSTP_ENABLE: STP is now enabled on the device.

%Apr 26 20:00:45:398 2000 WFRM-ERBU-13F-POE-5110 CFM/4/CFM_LOG:

Command poe enable fails to recover configuration.

%Apr 26 20:00:45:398 2000 WFRM-ERBU-13F-POE-5110 CFM/4/CFM_LOG:

Command poe enable fails to recover configuration.

%Apr 26 20:00:45:399 2000 WFRM-ERBU-13F-POE-5110 CFM/4/CFM_LOG:

Command poe enable fails to recover configuration.

%Apr 26 20:00:45:435 2000 WFRM-ERBU-13F-POE-5110 CFM/4/CFM_LOG:

<WFRM-ERBU-13F-POE-5110>dis version

H3C Comware Platform Software

Comware Software, Version 5.20.99, Release 1110

Copyright (c) 2004-2016 Hangzhou H3C Tech. Co., Ltd. All rights reserved.

H3C S5110-28P-PWR uptime is 0 week, 0 day, 0 hour, 7 minutes

H3C S5110-28P-PWR

128M    bytes DRAM

32M     bytes Flash Memory

Config Register points to Flash

Hardware Version is REV.A

Bootrom Version is 110

[SubSlot 0] 24GE+4SFP Hardware Version is REV.A