MSR2600是v5版本设备,现在想要一份MSR 5680设备v7版本的相同VPN配置!
麻烦大佬把v5命令转成v7的
设置列表
(0)
最佳答案
您好,请知:
可参考如下V7的配置命令:
[FW1]acl advanced 3000
[FW1-acl-ipv4-adv-3000]rule 0 permit ip source 192.168.1.0 0.0.0.255 destination 172.16.1.0 0.0.0.255
[FW1-acl-ipv4-adv-3000]quit
[FW1]ike keychain james
[FW1-ike-keychain-james]pre-shared-key address 202.2.100.2 255.255.255.252 key simple james
[FW1-ike-keychain-james]quit
[FW1]ike proposal 1
[FW1-ike-proposal-1]quit
[FW1]ike profile james
[FW1-ike-profile-james]keychain james
[FW1-ike-profile-james]proposal 1
[FW1-ike-profile-james]match remote identity address 202.2.100.2 255.255.255.252
[FW1-ike-profile-james]quit
[FW1]ipsec transform-set james
[FW1-ipsec-transform-set-james]protocol esp
[FW1-ipsec-transform-set-james]encapsulation-mode tunnel
[FW1-ipsec-transform-set-james]esp authentication-algorithm md5
[FW1-ipsec-transform-set-james]esp encryption-algorithm des-cbc
[FW1-ipsec-transform-set-james]quit
[FW1]ipsec policy james 1 isakmp
[FW1-ipsec-policy-isakmp-james-1]security acl 3000
[FW1-ipsec-policy-isakmp-james-1]transform-set james
[FW1-ipsec-policy-isakmp-james-1]ike-profile james
[FW1-ipsec-policy-isakmp-james-1]remote-address 202.2.100.2
[FW1-ipsec-policy-isakmp-james-1]quit
[FW1]int gi 1/0/2
[FW1-GigabitEthernet1/0/2]ipsec apply policy james
[FW1-GigabitEthernet1/0/2]quit
(0)
暂无评论
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
抄袭了我的内容
×
原文链接或出处
诽谤我
×
对根叔社区有害的内容
×
不规范转载
×
举报说明
暂无评论