SMART-LINK

SW3配置smart-link,现在增加一个新机房，业务vlan和SW3一样，是不是可以直接复制SW3的相关配置，就可以了？是否会影响SW3？

以下是SW3相关配置

 stp region-configuration 

 instance 1 vlan 10 100 

 instance 2 vlan 20 200 

 active region-configuration 

 smart-link group 1 preemption mode role

 flush enable control-vlan 100 

 protected-vlan reference-instance 0 to 1

 # smart-link group 2 

 preemption mode role flush enable

 control-vlan 200 protected-vlan reference-instance 2 

interface GigabitEthernet1/0/1

 port link-mode bridge

 port link-type trunk 

 undo port trunk permit vlan 1 

 port trunk permit vlan 10 20 100 200 2000

 combo enable fiber 

 undo stp enable 

 port smart-link group 1 primary

 port smart-link group 2 secondary 

# interface GigabitEthernet1/0/2 

 port link-mode bridge

 port link-type trunk 

 undo port trunk permit vlan 1 

 port trunk permit vlan 10 20 100 200 2000 

 combo enable fiber 

 undo stp enable 

 port smart-link group 1 secondary

 port smart-link group 2 primary