WT1024-Q下接分体AP，在集中转发和本地转发分别需要下发什么样的map文件？

 直通模式本地转发关键配置

#

[AC] interface vlan-interface 100

[AC-Vlan-interface100] ip address 10.1.9.58 16

# 创建AP模板，选择AP型号并配置序列号。

[AC] wlan ap 1020 model wt1020

[AC-wlan-ap-1020] serial-id DPPMWWB123456

[AC-wlan-ap-1020] wt version 1  

[AC-wlan-ap-1020] map-configuration cfa0:/1020.txt

[AC] wlan ap ap1 model wtu430

[AC-wlan-ap-ap1] serial-id 219801A0CNC138011454
[AC-wlan-ap-ap1] map-configuration cfa0:/430.txt

创建无线服务模板，并将无线服务模板绑定到AP的Radio接口。

# 配置无线无线服务模板service1，配置SSID为h3c-edu，并使能服务模版。

<AC> system-view

[AC] wlan service-template service1

[AC-wlan-st-service1] ssid h3c-edu

[AC-wlan-st-service1] client forwarding-location ap

[AC-wlan-st-service1] service-template enable

[AC-wlan-st-service1] quit

# 配置射频，指定工作信道为157。

[AC] wlan ap ap1

[AC-wlan-ap-ap1] radio 1

[AC-wlan-ap-ap1-radio-1] channel 157

# 将无线服务模板service1绑定到Radio 1接口。

[AC-wlan-ap-ap1-radio-1] service-template service1 vlan 3

[AC-wlan-ap-ap1-radio-1] radio enable

#本体map文件  

system-view

Vlan 3

interface GigabitEthernet1/0/1  //上联交换机                                               

 port link-type trunk                                                          

 port trunk permit vlan  3

#分体map文件

system-view

vlan 3

interface GigabitEthernet1/0/1                                                  

 port link-type trunk                                                          

 port trunk permit vlan  3

#上联交换机配置

interface GigabitEthernet1/0/18                                                

 port link-type trunk                                                          

 port trunk permit vlan  3 100

 port trunk pvid vlan 100