怎么把链路聚合的速率1g改为2g

把两个1G接口加入链路聚合组，这个聚合组就是2G

您好，两个1G的接口聚合，就可以

您好，请知：

使用两个1G的物理端口聚合即可。

以下是参考命令：

[SW1]int Bridge-Aggregation 1   //创建链路聚合组1

[SW1-Bridge-Aggregation1]quit

[SW1]int range gi 1/0/1 to gi 1/0/2

[SW1-if-range]port link-aggregation group 1  //将链路聚合组应用到接口

[SW1-if-range]quit

[SW1]int Bridge-Aggregation 1  //继续配置链路聚合组1

[SW1-Bridge-Aggregation1]port link-type trunk

Configuring GigabitEthernet1/0/1 done.

Configuring GigabitEthernet1/0/2 done.

[SW1-Bridge-Aggregation1]undo port trunk permit vlan 1

Configuring GigabitEthernet1/0/1 done.

Configuring GigabitEthernet1/0/2 done.

[SW1-Bridge-Aggregation1]port trunk permit vlan 10

Configuring GigabitEthernet1/0/1 done.

Configuring GigabitEthernet1/0/2 done.

[SW1-Bridge-Aggregation1]quit