Starting...... Press Ctrl+D to access BASIC BOOT MENU Booting Normal Extend BootWare.... ******************************************************************************** * * * H3C S5120V2-20P-LI Switch BOOTROM, Version 121 * * * ******************************************************************************** Copyright (c) 2004-2018 New H3C Technologies Co., Ltd.
Creation Date : May 4 2018, 16:17:55
CPU Clock Speed : 800MHz
Memory Size : 512MB
Flash Size : 256MB
CPLD Version : 001
PCB Version : Ver.A
Mac Address : 782c29e4cb6f
Image program does not exist.
Password recovery capability is enabled.
EXTENDED BOOT MENU
1. Download image to flash
2. Select image to boot
3. Display all files in flash
4. Delete file from flash
5. Restore to factory default configuration
6. Enter BootRom upgrade menu
7. Skip current system configuration
8. Set switch startup mode
9. Set The Operating Device
0. Reboot Ctrl+Z:
Access EXTENDED ASSISTANT MENU
Ctrl+F: Format file system
Ctrl+P: Change authentication for console login
Ctrl+R: Download image to SDRAM and run
Ctrl+C: Display Copyright Enter your choice(0-9): 2
1. Set image file
2. Set bin file
3. Set configuration file
0. Return to boot menu
Enter your choice(0-3): 1
File Number File Size(bytes) File Name ================================================================================ No right image in the current device!
EXTENDED BOOT MENU
1. Download image to flash
2. Select image to boot
3. Display all files in flash
4. Delete file from flash
5. Restore to factory default configuration
6. Enter BootRom upgrade menu
7. Skip current system configuration
8. Set switch startup mode
9. Set The Operating Device
0. Reboot Ctrl+Z:
Access EXTENDED ASSISTANT MENU
Ctrl+F: Format file system
Ctrl+P: Change authentication for console login
Ctrl+R: Download image to SDRAM and run
Ctrl+C: Display Copyright Enter your choice(0-9): 3
Display all file(s) in flash: File Number File Size(bytes) File Name ================================================================================ 1 6153216 flash:/default_file Free space: 248514560 bytes (*)-with main attribute (b)-with backup attribute (*b)-with both main and backup attribute
EXTENDED BOOT MENU
1. Download image to flash
2. Select image to boot
3. Display all files in flash
4. Delete file from flash
5. Restore to factory default configuration
6. Enter BootRom upgrade menu
7. Skip current system configuration
8. Set switch startup mode
9. Set The Operating Device
0. Reboot Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format file system
Ctrl+P: Change authentication for console login
Ctrl+R: Download image to SDRAM and run
Ctrl+C: Display Copyright Enter your choice(0-9): 4
Deleting the file in flash: File Number File Size(bytes) File Name ================================================================================ 1 6153216 flash:/default_file Free space: 248514560 bytes (*)-with main attribute (b)-with backup attribute (*b)-with both main and backup attribute Please input the file number to change:
不知道怎么操作,5120v2_li-cmw710-system-r6326.bin,谢谢各位工程师
(0)
您好,请知:
以下是软件版本文件下载链接:
https://www.h3c.com/cn/d_202104/1399175_30005_40.htm
请使用如下用户名密码登录后下载:
用户名:yx800
密码:01230123
注意查看软件版本说明书,有适配和导入的说明!
下载IPE文件解压,看到有BIN文件后再导入BIN文件到交换机内看下。
(0)
Are you sure to download file to flash? Yes or No (Y/N):Y
Now please start transfer file with XMODEM protocol
If you want to exit, Press <Ctrl+X>
Loading ...CCCCCCCCCCCCCCCCCCCCCCCCCDone.
Please input the file attribute (Main/Backup/None) m
Image file s5120v2_li-cmw710-system-r6328.bin is self-decompressing...
Load File name : default_file
Free space: 254672896 bytes
Writing flash...................................................................
................................................................................
.Done.
Set the file attribute failed!
Image file s5120v2_li-cmw710-boot-r6328.bin is self-decompressing...
Load File name : default_file
The file already exists, will you overwrite it? (Y/N):Y
Deleting........................................................................
...........................Done.
Free space: 254670848 bytes
Writing flash.....................Done.
Set the file attribute failed!
Your baudrate should be set to 9600 bps again!
Press enter key when ready
(0)
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
抄袭了我的内容
×
原文链接或出处
诽谤我
×
对根叔社区有害的内容
×
不规范转载
×
举报说明
谢谢
Are you sure to download file to flash? Yes or No (Y/N):Y Now please start transfer file with XMODEM protocol If you want to exit, Press <Ctrl+X> Loading ...CCCCCCCCCCCCCCCCCCCCCCCCCDone. Please input the file attribute (Main/Backup/None) m Image file s5120v2_li-cmw710-system-r6328.bin is self-decompressing... Load File name : default_file Free space: 254672896 bytes Writing flash................................................................... ................................................................................ .Done. Set the file attribute failed! Image file s5120v2_li-cmw710-boot-r6328.bin is self-decompressing... Load File name : default_file The file already exists, will you overwrite it? (Y/N):Y Deleting........................................................................ ...........................Done. Free space: 254670848 bytes Writing flash.....................Done. Set the file attribute failed! Your baudrate should be set to 9600 bps again! Press enter key when ready