问

WA6320如何调为胖模式

软件升级

2021-07-29提问

0关注
1收藏，3313浏览

zhiliao_lPUYBQ

zhiliao_lPUYBQ 零段

粉丝：0人关注：0人

问题描述：

WA6320如何调为胖模式

组网及组网描述：

最佳答案

李云龙的意大利炮

李云龙的意大利炮九段

粉丝：96人关注：1人

https://www.h3c.com/cn/d_202106/1421362_30005_40.htm

用户名：yx800

密码：01230123

1、首先升级扩展boot版本，要求boot版本必须为对应版本配套的7.18版本，版本文件中可获取

启动后Ctrl+B进入bootware，选择7进入bootware操作子菜单

****************************************************************************

* *

* H3C WA5320 BootWare, Version 7.15 *

* *

****************************************************************************

Compiled Date : Aug 21 2018

CPU Type : ARM

CPU L1 Cache : 32KB

CPU L2 Cache : 256KB

CPU Clock Speed : 710MHz

Memory Type : DDR3 SDRAM

Memory Size : 256MB

Memory Speed : 533MHz

Flash Size : 32MB

PCB Version : Ver.B

BootWare Validating...

Press Ctrl+B to access EXTENDED-BOOTWARE MENU...

Password recovery capability is enabled.

Note: The current operating device is flash

Enter < Storage Device Operation > to select device.

====================================================

|<1> Boot System |

|<2> Enter Serial SubMenu |

|<3> Enter Ethernet SubMenu |

|<4> File Control |

|<5> Restore to Factory Default Configuration |

|<6> Skip Current System Configuration |

|<7> BootWare Operation Menu |

|<8> Skip Authentication for Console Login |

|<9> Storage Device Operation |

|<0> Reboot |

============================================================================

Ctrl+Z: Access EXTENDED ASSISTANT MENU

Ctrl+F: Format File System

Ctrl+C: Display Copyright

Ctrl+Y: Change AP Mode

Enter your choice(0-9): 7

选择4设置更新bootware方式通过网线

===================================================

|Note:the operating device is flash |

|<1> Backup Full BootWare |

|<2> Restore Full BootWare |

|<3> Update BootWare By Serial |

|<4> Update BootWare By Ethernet |

|<0> Exit To Main Menu |

============================================================================

Enter your choice(0-4): 4

选择4设置上传配置

======================================

|<1> Update Full BootWare |

|<2> Update Extended BootWare |

|<3> Update Basic BootWare |

|<4> Modify Ethernet Parameter |

|<0> Exit To Main Menu |

============================================================================

Enter your choice(0-4): 4

设置上传文件名，此处是更新bootware，需上传boot文件；设置IP地址

====================================================

|Note: "." = Clear field. |

| "-" = Go to previous field. |

| Ctrl+D = Quit. |

============================================================================

Protocol (FTP or TFTP) :tftp

Load File Name :wa5300.ipe

:apwa5300_v7.18.btw

Target File Name :wa5300.ipe

:apwa5300_v7.18.btw

Server IP Address :192.168.0.99 10.0.0.233

Local IP Address :192.168.0.98 10.0.0.2

Subnet Mask :255.255.255.0

Gateway IP Address :0.0.0.0

选择1更新bootware

======================================

|<1> Update Full BootWare |

|<2> Update Extended BootWare |

|<3> Update Basic BootWare |

|<4> Modify Ethernet Parameter |

|<0> Exit To Main Menu |

============================================================================

Enter your choice(0-4): 1

Loading...........................Done.

1233920 bytes downloaded!

Updating Basic BootWare? [Y/N]Y

Updating Basic BootWare.....Done.

Updating Extended BootWare? [Y/N]Y

Updating Extended BootWare.........Done.

更新完成后选择0退回主界面并reboot

======================================

|<1> Update Full BootWare |

|<2> Update Extended BootWare |

|<3> Update Basic BootWare |

|<4> Modify Ethernet Parameter |

|<0> Exit To Main Menu |

============================================================================

Enter your choice(0-4): 0

===================================================

|Note:the operating device is flash |

|<1> Backup Full BootWare |

|<2> Restore Full BootWare |

|<3> Update BootWare By Serial |

|<4> Update BootWare By Ethernet |

|<0> Exit To Main Menu |

============================================================================

Enter your choice(0-4): 0

====================================================

|<1> Boot System |

|<2> Enter Serial SubMenu |

|<3> Enter Ethernet SubMenu |

|<4> File Control |

|<5> Restore to Factory Default Configuration |

|<6> Skip Current System Configuration |

|<7> BootWare Operation Menu |

|<8> Skip Authentication for Console Login |

|<9> Storage Device Operation |

|<0> Reboot |

============================================================================

Ctrl+Z: Access EXTENDED ASSISTANT MENU

Ctrl+F: Format File System

Ctrl+C: Display Copyright

Ctrl+Y: Change AP Mode

Enter your choice(0-9): 0

System is starting...

Press Ctrl+D to access BASIC-BOOTWARE MENU

Booting Normal Extended BootWare

The Extended BootWare is self-decompressing.................................

.Done.

重启完成后查看bootwre版本为7.18，再次Ctrl+B进入bootware，Ctrl+F格式化flash，此处注意需要格式化，避免空间不足导致版本解压失败

****************************************************************************

* *

* H3C WA5320 BootWare, Version 7.18 *

* *

****************************************************************************

Compiled Date : Mar 8 2019

CPU Type : ARM

CPU L1 Cache : 32KB

CPU L2 Cache : 256KB

CPU Clock Speed : 710MHz

Memory Type : DDR3 SDRAM

Memory Size : 256MB

Memory Speed : 533MHz

Flash Size : 32MB

PCB Version : Ver.B

BootWare Validating...

Press Ctrl+B to access EXTENDED-BOOTWARE MENU...

Password recovery capability is enabled.

Note: The current operating device is flash

Enter < Storage Device Operation > to select device.

====================================================

|<1> Boot System |

|<2> Enter Serial SubMenu |

|<3> Enter Ethernet SubMenu |

|<4> File Control |

|<5> Restore to Factory Default Configuration |

|<6> Skip Current System Configuration |

|<7> BootWare Operation Menu |

|<8> Skip Authentication for Console Login |

|<9> Storage Device Operation |

|<0> Reboot |

============================================================================

Ctrl+Z: Access EXTENDED ASSISTANT MENU

Ctrl+F: Format File System

Ctrl+C: Display Copyright

Ctrl+Y: Change AP Mode

Enter your choice(0-9):

Warning:All files on flash will be lost! Are you sure to format? [Y/N]Y.....

............................................................................

..................

Format success.

格式化完成后选择3进入ethernet子菜单

====================================================

|<1> Boot System |

|<2> Enter Serial SubMenu |

|<3> Enter Ethernet SubMenu |

|<4> File Control |

|<5> Restore to Factory Default Configuration |

|<6> Skip Current System Configuration |

|<7> BootWare Operation Menu |

|<8> Skip Authentication for Console Login |

|<9> Storage Device Operation |

|<0> Reboot |

============================================================================

Ctrl+Z: Access EXTENDED ASSISTANT MENU

Ctrl+F: Format File System

Ctrl+C: Display Copyright

Ctrl+Y: Change AP Mode

Enter your choice(0-9): 3

选5设置有线网络配置，上传之前需要把胖AP版本文件名改成wa5300-oasis.ipe

====================================================

|Note:the operating device is flash |

|<1> Download Image Program To SDRAM And Run |

|<2> Update Main Image File |

|<3> Update Backup Image File |

|<4> Download Files(*.*) |

|<5> Modify Ethernet Parameter |

|<0> Exit To Main Menu |

| |

============================================================================

Enter your choice(0-5): 5

====================================================

|Note: "." = Clear field. |

| "-" = Go to previous field. |

| Ctrl+D = Quit. |

============================================================================

Protocol (FTP or TFTP) :tftp

Load File Name :apwa5300_v7.18.btw

:wa5300-oasis.ipe

Target File Name :apwa5300_v7.18.btw

:wa5300-oasis.ipe

Server IP Address :10.0.0.233

Local IP Address :10.0.0.2

Subnet Mask :255.255.255.0

Gateway IP Address :0.0.0.0

配置完成后选择2，更新主版本文件

====================================================

|Note:the operating device is flash |

|<1> Download Image Program To SDRAM And Run |

|<2> Update Main Image File |

|<3> Update Backup Image File |

|<4> Download Files(*.*) |

|<5> Modify Ethernet Parameter |

|<0> Exit To Main Menu |

| |

============================================================================

Enter your choice(0-5): 2

Loading.....................................................................

............................................................................

..............Done.

27445248 bytes downloaded!

Image file wa5300-oasis-boot.bin is self-decompressing...

Saving file flash:/wa5300-oasis-boot.bin ...................................

.............................Done.

Image file wa5300-oasis-system.bin is self-decompressing...

Saving file flash:/wa5300-oasis-system.bin .................................

............................................................................

...........................Done.

升级完成后选择0退回主界面并且reboot

====================================================

|Note:the operating device is flash |

|<1> Download Image Program To SDRAM And Run |

|<2> Update Main Image File |

|<3> Update Backup Image File |

|<4> Download Files(*.*) |

|<5> Modify Ethernet Parameter |

|<0> Exit To Main Menu |

| |

============================================================================

Enter your choice(0-5): 0

====================================================

|<1> Boot System |

|<2> Enter Serial SubMenu |

|<3> Enter Ethernet SubMenu |

|<4> File Control |

|<5> Restore to Factory Default Configuration |

|<6> Skip Current System Configuration |

|<7> BootWare Operation Menu |

|<8> Skip Authentication for Console Login |

|<9> Storage Device Operation |

|<0> Reboot |

============================================================================

Ctrl+Z: Access EXTENDED ASSISTANT MENU

Ctrl+F: Format File System

Ctrl+C: Display Copyright

Ctrl+Y: Change AP Mode

Enter your choice(0-9): 0

System is starting...

Press Ctrl+D to access BASIC-BOOTWARE MENU

Booting Normal Extended BootWare

The Extended BootWare is self-decompressing.................................

.Done.

****************************************************************************

* *

* H3C WA5320 BootWare, Version 7.18 *

* *

****************************************************************************

Compiled Date : Mar 8 2019

CPU Type : ARM

CPU L1 Cache : 32KB

CPU L2 Cache : 256KB

CPU Clock Speed : 710MHz

Memory Type : DDR3 SDRAM

Memory Size : 256MB

Memory Speed : 533MHz

Flash Size : 32MB

PCB Version : Ver.B

BootWare Validating...

Press Ctrl+B to access EXTENDED-BOOTWARE MENU...

Loading the main image files...

Loading file flash:/wa5300-oasis-system.bin.................................

............................................................................

...........................................................................

Done.

Loading file flash:/wa5300-oasis-boot.bin...................................

Done.

Image file flash:/wa5300-oasis-boot.bin is self-decompressing...............

............................................................................

...............................Done.

System image is starting...

Startup configuration file doesn"t exist or is invalid.

Line con0 is available.

Press ENTER to get started.

至此设备启动完成

配置关键点

1.需要升级设备bootware版本至7.18

2.升级完bootware后需要格式化Flash

3.对应版本文件需要修改成wa5300-oasis.ipe

云AP是Fat AP。初次使用云AP，给云AP上电后，云AP会默认开启4个无线服务：

l 其中一个称之为管理WIFI，也称内部WIFI，SSID为H3C_XXXXXX，XXXXXX为设备mac地址后六位。管理WIFI供商铺内部员工管理使用，一般在2.4G频段工作，当设备未连接到绿洲时，通过连接管理WIFI在浏览器输入10.40.94.1或myap.h3c.com访问本地web页面可进行本设备下的无线服务管理配置，一旦连接上绿洲，将只能通过绿洲平台进行统一的无线服务配置管理。