怎么配置加密无线网络,配置好了网络后开启无线功能时总是提示错误 wepkey-id1不能和rsn/wpa一起使用
(0)
wlan service-template 1
ssid service
vlan 200
akm mode psk
preshared-key pass-phrase cipher $c$3$N//5BVbsOqdBTxi+7MJZKT6Zqh5MAmYs2ZzM
cipher-suite ccmp
security-ie rsn
service-template enable
(0)
以下是配置无线密码的参考命令:
# 启用port-security
[WAP722S]port-security enable
# 配置无线接口,认证方式为PSK
[WAP722S]interface WLAN-BSS2
[WAP722S-WLAN-BSS2]port-security port-mode psk
[WAP722S-WLAN-BSS2]port-security tx-key-type 11key
[WAP722S-WLAN-BSS2]port-security preshared-key pass-phrase 12345678
# 配置无线服务模板
[WAP722S-wlan-rp-rp]wlan service-template 2 crypto
[WAP722S-wlan-st-2]ssid xiaobei722s
[WAP722S-wlan-st-2]authentication-method open-system
[WAP722S-wlan-st-2] cipher-suite tkip
[WAP722S-wlan-st-2] cipher-suite ccmp //相当于WEB中的AES
[WAP722S-wlan-st-2] security-ie wpa
[WAP722S-wlan-st-2] security-ie rsn //相当于WEB中的WPA2
[WAP722S-wlan-st-2]service-template enable //开启服务
# 在射频口绑定无线服务模板和无线口
[WAP722S]interface WLAN-Radio 1/0/2 // WLAN-Radio 1/0/2代表2.4G,WLAN-Radio 1/0/1代表5G,用户据实际情况选择绑定
[WAP722S-WLAN-Radio1/0/2]service-template 2 interface WLAN-BSS 2
# 配置VLAN 虚接口
[WAP722S]interface Vlan-interface1
[WAP722S-Vlan-interface1]ip address 192.168.0.50 255.255.255.0 //默认IP,可以修改为其他IP
#保存配置
save force
(0)
暂无评论
wlan service-template 354
ssid 354
vlan 154
akm mode psk
preshared-key pass-phrase cipher $c$3$CrPVXNerQM1WeBRzpKnGusKB0hPrqh8MXnos
cipher-suite ccmp
cipher-suite tkip
security-ie rsn
security-ie wpa
service-template enable
#
(0)
暂无评论
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
抄袭了我的内容
×
原文链接或出处
诽谤我
×
对根叔社区有害的内容
×
不规范转载
×
举报说明
暂无评论