H3c 5560交换机定时开启或关闭端口

您好，可以做job任务，定时执行接口shut/undo shut动作，就能实现需求了，详细操作方法可以参考对应设备的配置手册

使用指导】 使用scheduler schedule命令可以配置定时执行任务，让设备在指定时间执行指定命令。 配置步骤如下： (1) 使用scheduler job命令创建Job。 (2) 在Job视图下，使用command命令配置需要执行的命令。 (3) 使用scheduler schedule命令创建Schedule。 (4) 在Schedule视图下，使用job命令为Schedule分配Job。一个Schedule下可以分配多个Job，但必须是已创建的Job，否则分配失败。 (5) 在Schedule视图下，使用user-role命令为Schedule配置用户角色。一个Schedule下最多可以分配64个角色。 (6) 在Schedule视图下，使用time at、time once或者time repeating命令来配置任务执行的时间。一个Schedule下只能设置一个执行时间。

这里有个案例：定时执行任务典型配置举例

1. 组网需求

对Device进行配置，在星期一到星期五的上午八点到下午十八点开启GigabitEthernet2/0/1和GigabitEthernet2/0/2，其它时间关闭端口，以便起到有效节能的作用。

2. 组网图

图1-1 定时执行任务典型配置举例组网图

3. 配置步骤

# 进入系统视图。

<Sysname> system-view

# 创建关闭GigabitEthernet2/0/1的Job。

[Sysname] scheduler job shutdown-GigabitEthernet2/0/1

[Sysname-job-shutdown-GigabitEthernet2/0/1] command 1 system-view

[Sysname-job-shutdown-GigabitEthernet2/0/1] command 2 interface gigabitethernet 2/0/1

[Sysname-job-shutdown-GigabitEthernet2/0/1] command 3 shutdown

[Sysname-job-shutdown-GigabitEthernet2/0/1] quit

# 创建开启GigabitEthernet2/0/1的Job。

[Sysname] scheduler job start-GigabitEthernet2/0/1

[Sysname-job-start-GigabitEthernet2/0/1] command 1 system-view

[Sysname-job-start-GigabitEthernet2/0/1] command 2 interface gigabitethernet 2/0/1

[Sysname-job-start-GigabitEthernet2/0/1] command 3 undo shutdown

[Sysname-job-start-GigabitEthernet2/0/1] quit

# 创建关闭GigabitEthernet2/0/2的Job。

[Sysname] scheduler job shutdown-GigabitEthernet2/0/2

[Sysname-job-shutdown-GigabitEthernet2/0/2] command 1 system-view

[Sysname-job-shutdown-GigabitEthernet2/0/2] command 2 interface gigabitethernet 2/0/2

[Sysname-job-shutdown-GigabitEthernet2/0/2] command 3 shutdown

[Sysname-job-shutdown-GigabitEthernet2/0/2] quit

# 创建开启GigabitEthernet2/0/2的Job。

[Sysname] scheduler job start-GigabitEthernet2/0/2

[Sysname-job-start-GigabitEthernet2/0/2] command 1 system-view

[Sysname-job-start-GigabitEthernet2/0/2] command 2 interface gigabitethernet 2/0/2

[Sysname-job-start-GigabitEthernet2/0/2] command 3 undo shutdown

[Sysname-job-start-GigabitEthernet2/0/2] quit

# 配置定时执行任务，使Device在星期一到星期五的上午八点开启pc1、pc2对应的以太网端口。

[Sysname] scheduler schedule START-pc1/pc2

[Sysname-schedule-START-pc1/pc2] job start-GigabitEthernet2/0/1

[Sysname-schedule-START-pc1/pc2] job start-GigabitEthernet2/0/2

[Sysname-schedule-START-pc1/pc2] time repeating at 8:00 week-day mon tue wed thu fri

[Sysname-schedule-START-pc1/pc2] quit

# 配置定时执行任务，使Device在星期一到星期五的下午十八点关闭pc1、pc2对应的以太网端口。

[Sysname] scheduler schedule STOP-pc1/pc2

[Sysname-schedule- STOP-pc1/pc2] job shutdown-GigabitEthernet2/0/1

[Sysname-schedule- STOP-pc1/pc2] job shutdown-GigabitEthernet2/0/2

[Sysname-schedule- STOP-pc1/pc2] time repeating at 18:00 week-day mon tue wed thu fri

[Sysname-schedule- STOP-pc1/pc2] quit

4. 结果验证

# 显示Job的配置信息。

[Sysname] display scheduler job

Job name: shutdown-GigabitEthernet2/0/1

 system-view

 interface gigabitethernet 2/0/1

 shutdown

Job name: shutdown-GigabitEthernet2/0/2

 system-view

 interface gigabitethernet 2/0/2

 shutdown

Job name: start-GigabitEthernet2/0/1

 system-view

 interface GigabitEthernet 2/0/1

 undo shutdown

Job name: start-GigabitEthernet2/0/2

 system-view

 interface gigabitethernet 2/0/2

 undo shutdown

# 显示定时任务的运行信息。

[Sysname] display scheduler schedule

Schedule name        : START-pc1/pc2

Schedule type        : Run on every Mon Tue Wed Thu Fri at 08:00:00

Start time           : Wed Sep 28 08:00:00 2011

Last execution time  : Wed Sep 28 08:00:00 2011

Last completion time : Wed Sep 28 08:00:03 2011

Execution counts     : 1

-----------------------------------------------------------------------

Job name                                          Last execution status

start-GigabitEthernet2/0/1                                 Successful

start-GigabitEthernet2/0/2                                 Successful

Schedule name        : STOP-pc1/pc2

Schedule type        : Run on every Mon Tue Wed Thu Fri at 18:00:00

Start time           : Wed Sep 28 18:00:00 2011

Last execution time  : Wed Sep 28 18:00:00 2011

Last completion time : Wed Sep 28 18:00:01 2011

Execution counts     : 1

-----------------------------------------------------------------------

Job name                                          Last execution status

shutdown-GigabitEthernet2/0/1                              Successful

shutdown-GigabitEthernet2/0/2                              Successful

# 显示Job运行的输出信息。

[Sysname] display scheduler logfile

Job name        : start-GigabitEthernet2/0/1

Schedule name   : START-pc1/pc2

Execution time  : Wed Sep 28 08:00:00 2011

Completion time : Wed Sep 28 08:00:02 2011

--------------------------------- Job output -----------------------------------

<Sysname>system-view

System View: return to User View with Ctrl+Z.

[Sysname]interface gigabitethernet 2/0/1

[Sysname-GigabitEthernet2/0/1]undo shutdown

Job name        : start-GigabitEthernet2/0/2

Schedule name   : START-pc1/pc2

Execution time  : Wed Sep 28 08:00:00 2011

Completion time : Wed Sep 28 08:00:02 2011

--------------------------------- Job output -----------------------------------

<Sysname>system-view

System View: return to User View with Ctrl+Z.

[Sysname]interface gigabitethernet 2/0/2.

[Sysname-GigabitEthernet2/0/2]undo shutdown

Job name        : shutdown-GigabitEthernet2/0/1

Schedule name   : STOP-pc1/pc2

Execution time  : Wed Sep 28 18:00:00 2011

Completion time : Wed Sep 28 18:00:01 2011

--------------------------------- Job output -----------------------------------

<Sysname>system-view

System View: return to User View with Ctrl+Z.

[Sysname]interface gigabitethernet 2/0/1

[Sysname-GigabitEthernet2/0/1]shutdown

Job name        : shutdown-GigabitEthernet2/0/2

Schedule name   : STOP-pc1/pc2

Execution time  : Wed Sep 28 18:00:00 2011

Completion time : Wed Sep 28 18:00:01 2011

--------------------------------- Job output -----------------------------------

<Sysname>system-view

System View: return to User View with Ctrl+Z.

[Sysname]interface gigabitethernet 2/0/2

[Sysname-GigabitEthernet2/0/2]shutdown