行为审计ACG1000-E出现异常死机无法启动现象

产品型号：ACG1000-E 

系统版本：i-Ware software,Version 1.10,Release 6606 

固件版本：Firmware is SecPathACG1000-IMW110-R6606-ALL.BIN

设备出现故障，全灯常亮，断电重启后出现报错，无法正常启动；

无法通过CTRL+C进入Bootrom菜单，出现相关报错为：

[19:01:04]Loading file 'menuboot' to addr 0x20000000 with size 36447696 (0x022c25d0)... 

[19:01:09]Loading menuboot: |........................... | 68%UBI: fixable bit-flip detected at PEB 1320 

[19:01:09]UBI: schedule PEB 1320 for scrubbing 

[19:01:09]UBI error: ubi_io_read: error -77 while reading 520192 bytes from PEB 1320:4096, read 520192 bytes 

[19:01:09]UBI warning: ubi_eba_copy_leb: error -77 while reading data from PEB 1320 

[19:01:09]UBI error: wear_leveling_worker: error -77 while moving PEB 1320 to PEB 416 

[19:01:09]UBI warning: ubi_ro_mode: switch to read-only mode [19:01:09]UBI error: do_work: work failed with error code -77

[19:01:10]Loading menuboot: |............................ | 70%UBI error: ubi_io_read: error -77 while reading 4144 bytes from PEB 1320:421888, read 4144 bytes 

[19:01:10]UBIFS error (pid 0): try_read_node: cannot read node type 1 from LEB 408:417792, error -77 

[19:01:10]UBI error: ubi_io_read: error -77 while reading 4144 bytes from PEB 1320:421888, read 4144 bytes 

[19:01:10]UBIFS error (pid 0): ubifs_check_node: bad CRC: calculated 0x3364141d, read 0x59d8419e

[19:01:10]UBIFS error (pid 0): ubifs_check_node: bad node at LEB 408:417792 

[19:01:10]UBIFS error (pid 0): ubifs_read_node: expected node type 1 

[19:01:10]UBIFS error (pid 0): do_readpage: cannot read page 6142 of inode 178, error -135

报错相关：

[19:01:16][ 30.441285] Call Trace: 

[19:01:17][ 30.470453] [<ffffffff80192158>] run_local_timers+0x38/0x78 

[19:01:17][ 30.537116] [<ffffffff801921d4>] update_process_times+0x3c/0x80 

[19:01:17][ 30.607948] [<ffffffff801c4d90>] tick_handle_periodic+0x28/0xa0 

[19:01:17][ 30.678775] [<ffffffff80163f24>] c0_compare_interrupt+0x5c/0x88 

[19:01:17][ 30.749603] [<ffffffff801d7408>] handle_irq_event_percpu+0x88/0x228

[19:01:17][ 30.824599] [<ffffffff801db304>] handle_percpu_irq+0x8c/0xc0 

[19:01:17][ 30.892303] [<ffffffff801d6aa8>] generic_handle_irq+0x28/0x48

[19:01:17][ 30.961047] [<ffffffff8015e638>] do_IRQ+0x18/0x30

[19:01:17][ 31.017296] [<ffffffff80106478>] plat_irq_dispatch+0x98/0xc0 

[19:01:17][ 31.084994] [19:01:17][ 31.102701] 

 [19:01:17]Code: 0043102d 0c06a7ee dc500000 <de020020> 1040000a 3c03808c de020018 dc630900 0062102f 

 [19:01:17][ 31.221445] ---[ end trace 139ce121c98e96cb ]--- 

[19:01:17][ 31.276650] Kernel panic - not syncing: Fatal exception in interrupt