IRF(接口1/1/1;1/1/2和2/1/1;2/1/2)突然分裂,拔插堆叠线无用后手动重启设备后回复正常,
logfile里显示先是1/1/1变为inactive状态,1/1/2无法接收irf pkt,然后BFD MAD检测,然后1/1/2无法接收irf pkt;然后链路_超时:由于心跳超时,IRF端口1关闭。然后链路故障:IRF端口1故障;最后报板卡故障。
想知道突然分裂可能是什么造成的?望告知,谢谢!
%@10207%Oct 17 10:57:48:058 2021 D06_D07-S6520 DRVPLAT/4/DrvDebug:
The port Forty1/1/1 has been changed to inactive status, please check.
%@10208%Oct 17 10:57:58:170 2021 D06_D07-S6520 DRVPLAT/4/DrvDebug:
The port Forty1/1/2 can't receive irf pkt, please check.
%@10209%Oct 17 10:57:58:700 2021 D06_D07-S6520 BFD/5/BFD_CHANGE_FSM: Sess[192.168.255.1/192.168.255.2, LD/RD:129/129, Interface:Vlan4094, SessType:Ctrl, LinkType:INET], Ver:1, Sta: DOWN->INIT, Diag: 0 (No Diagnostic)
%@10210%Oct 17 10:57:58:705 2021 D06_D07-S6520 BFD/5/BFD_CHANGE_FSM: Sess[192.168.255.1/192.168.255.2, LD/RD:129/129, Interface:Vlan4094, SessType:Ctrl, LinkType:INET], Ver:1, Sta: INIT->UP, Diag: 0 (No Diagnostic)
%@10211%Oct 17 10:57:58:714 2021 D06_D07-S6520 BFD/5/BFD_CHANGE_FSM: Sess[192.168.255.1/192.168.255.2, LD/RD:129/129, Interface:Vlan4094, SessType:Ctrl, LinkType:INET], Ver:1, Sta: UP->DOWN, Diag: 1 (Control Detection Time Expired)
%@10212%Oct 17 10:58:07:209 2021 D06_D07-S6520 DRVPLAT/4/DrvDebug:
The port Forty1/1/2 can't receive irf pkt, please check.
%@10213%Oct 17 10:58:08:087 2021 D06_D07-S6520 STM/2/STM_LINK_TIMEOUT: IRF port 1 went down because the heartbeat timed out.
%@10214%Oct 17 10:58:08:094 2021 D06_D07-S6520 STM/3/STM_LINK_DOWN: IRF port 1 went down.
%@10215%Oct 17 10:58:08:159 2021 D06_D07-S6520 LAGG/6/LAGG_INACTIVE_PHYSTATE: Member port XGE2/0/1 of aggregation group BAGG101 changed to the inactive state, because the physical state of the port is down.
%@10216%Oct 17 10:58:08:169 2021 D06_D07-S6520 LAGG/6/LAGG_INACTIVE_PHYSTATE: Member port XGE2/0/2 of aggregation group BAGG102 changed to the inactive state, because the physical state of the port is down.
%@10217%Oct 17 10:58:08:180 2021 D06_D07-S6520 LAGG/6/LAGG_INACTIVE_PHYSTATE: Member port XGE2/0/3 of aggregation group BAGG103 changed to the inactive state, because the physical state of the port is down.
%@10218%Oct 17 10:58:08:189 2021 D06_D07-S6520 LAGG/6/LAGG_INACTIVE_PHYSTATE: Member port XGE2/0/4 of aggregation group BAGG104 changed to the inactive state, because the physical state of the port is down.
%@10219%Oct 17 10:58:08:197 2021 D06_D07-S6520 LAGG/6/LAGG_INACTIVE_PHYSTATE: Member port XGE2/0/5 of aggregation group BAGG105 changed to the inactive state, because the physical state of the port is down.
%@10220%Oct 17 10:58:08:204 2021 D06_D07-S6520 LAGG/6/LAGG_INACTIVE_PHYSTATE: Member port XGE2/0/6 of aggregation group BAGG106 changed to the inactive state, because the physical state of the port is down.
%@10221%Oct 17 10:58:08:210 2021 D06_D07-S6520 DEV/2/BOARD_STATE_FAULT: Board state changed to Fault on slot 2, type is MAIN_BOARD_TYPE_S6520X_54QC_EI.
(0)
最佳答案
应该是bfd配置问题导致的
(0)
是保留端口吗?还是别的什么
vlan 4094 description BFD interface Vlan-interface4094 description BFD mad bfd enable mad ip address 192.168.255.1 255.255.255.252 member 1 mad ip address 192.168.255.2 255.255.255.252 member 2 interface Ten-GigabitEthernet1/0/48 port link-mode bridge description BFD port access vlan 4094 undo stp enable interface Ten-GigabitEthernet2/0/48 port link-mode bridge description BFD port access vlan 4094 undo stp enable
vlan 4094 description BFD
interface Vlan-interface4094 description BFD mad bfd enable mad ip address 192.168.255.1 255.255.255.252 member 1 mad ip address 192.168.255.2 255.255.255.252 member 2
interface Ten-GigabitEthernet1/0/48 port link-mode bridge description BFD port access vlan 4094 undo stp enable
interface Ten-GigabitEthernet2/0/48 port link-mode bridge description BFD port access vlan 4094 undo stp enable
好的,谢谢
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
抄袭了我的内容
×
原文链接或出处
诽谤我
×
对根叔社区有害的内容
×
不规范转载
×
举报说明
好的,谢谢