问

S2626 BootWare Validating...

软件升级/降级

2021-11-15提问

0关注
1收藏，1225浏览

zhiliao_OmPVJD

zhiliao_OmPVJD 零段

粉丝：0人关注：0人

问题描述：

System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU

===============================<BAUDRATE SET>===============================
|Note:'*'indicates the current baudrate                                    |
|     Change The HyperTerminal's Baudrate Accordingly                      |
|---------------------------<Baudrate Available>---------------------------|
|<1> 9600(Default)*                                                        |
|<2> 19200                                                                 |
|<3> 38400                                                                 |
|<4> 57600                                                                 |
|<5> 115200                                                                |
|<0> Exit                                                                  |
============================================================================
Enter your choice(0-5): 5
Baudrate has been changed to 115200 bps.
Please change the terminal's baudrate to 115200 bps, press ENTER when ready.
The current baudrate is 115200 bps

===============================<BAUDRATE SET>===============================
|Note:'*'indicates the current baudrate                                    |
|     Change The HyperTerminal's Baudrate Accordingly                      |
|---------------------------<Baudrate Available>---------------------------|
|<1> 9600(Default)                                                         |
|<2> 19200                                                                 |
|<3> 38400                                                                 |
|<4> 57600                                                                 |
|<5> 115200*                                                               |
|<0> Exit                                                                  |
============================================================================
Enter your choice(0-5): 0

======================<BASIC-BOOTWARE MENU(Ver 1.22)>=======================
|<1> Modify Serial Interface Parameter                                     |
|<2> Update Extend BootWare                                                |
|<3> Update Full BootWare                                                  |
|<4> Boot Extend BootWare                                                  |
|<5> Boot Backup Extend BootWare                                           |
|<0> Reboot                                                                |
============================================================================
Enter your choice(0-5): 3
Please Start To Transfer File, Press <Ctrl+C> To Exit.
Waiting ...CCCCCCCCCCCCCC
Download successfully!
12196864 bytes downloaded!
Updating Basic BootWare? [Y/N]Y
Updating Basic BootWare..........Done!
Updating Extend BootWare? [Y/N]Y
Updating Extend BootWare..........Done!

===============================<BAUDRATE SET>===============================
|Note:'*'indicates the current baudrate                                    |
|     Change The HyperTerminal's Baudrate Accordingly                      |
|---------------------------<Baudrate Available>---------------------------|
|<1> 9600(Default)                                                         |
|<2> 19200                                                                 |
|<3> 38400                                                                 |
|<4> 57600                                                                 |
|<5> 115200*                                                               |
|<0> Exit                                                                  |
============================================================================
Enter your choice(0-5): 1
Baudrate has been changed to 9600 bps.
Please change the terminal's baudrate to 9600 bps, press ENTER when ready.
The current baudrate is 9600 bps

======================<BASIC-BOOTWARE MENU(Ver 1.22)>=======================
|<1> Modify Serial Interface Parameter                                     |
|<2> Update Extend BootWare                                                |
|<3> Update Full BootWare                                                  |
|<4> Boot Extend BootWare                                                  |
|<5> Boot Backup Extend BootWare                                           |
|<0> Reboot                                                                |
============================================================================
Enter your choice(0-5): 0
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU
Booting Normal Extend BootWare
The Extend BootWare is self-decompressing......................Done!

****************************************************************************
*                                                                          *
*                    H3C S2626 BootWare, Version 1.06                      *
*                                                                          *
****************************************************************************
Copyright (c) 2004-2013 Hangzhou H3C Technologies Co., Ltd.

Compiled Date       : Aug 9 2013 10:46:00
CPU Type            : MIPS4kec
CPU L1 Cache        : 16KB
CPU Clock Speed     : 500MHz
Memory Type         : DDR3 SDRAM
Memory Size         : 128MB
Memory Speed        : 300MHz
BootWare Size       : 3MB
Flash Size          : 32MB

BootWare Validating...
Backup Extend BootWare is newer than Normal Extend BootWare,Update? [Y/N]
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU
Booting Normal Extend BootWare
The Extend BootWare is self-decompressing......................Done!