S5024PV5-EI-HPWR

这个系列现在目前有十多台都出现了接口不供电，但是业务正常。这种具体是啥情况，目前我能知道的是5口、6口是有问题的，开了poe供电还是一样的情况。dis poe device Slot 1: PSE ID Slot No. SSlot No. PortNum MaxPower(W) State Model 4 1 0 24 370.0 Off LSPPSE24B 

dis poe pse | exclude 6 PSE ID : 4 Slot No. : 1 SSlot No. : 0 PSE Model : LSPPSE24B PSE Status : Enabled Power Priority : Low Current Power : 0.0 W Average Power : 0.0 W Peak Power : 0.0 W Max Power : 370.0 W Remaining Guaranteed Power : 370.0 W PSE CPLD Version : - PSE Software Version : 0 PSE Hardware Version : 0 PSE Legacy PD Detection : Disabled Power Utilization Threshold : 80 PD Power Policy : Disabled PD Disconnect-Detection Mode : DC PD High Inrush : Disabled

dis poe pse | exclude 5 PSE ID : 4 Slot No. : 1 SSlot No. : 0 PSE Model : LSPPSE24B PSE Status : Enabled Power Priority : Low Current Power : 0.0 W Average Power : 0.0 W Peak Power : 0.0 W Max Power : 370.0 W Remaining Guaranteed Power : 370.0 W PSE CPLD Version : - PSE Software Version : 0 PSE Hardware Version : 0 PSE Legacy PD Detection : Disabled Power Utilization Threshold : 80 PD Power Policy : Disabled PD Disconnect-Detection Mode : DC PD High Inrush : Disabled

-GigabitEthernet1/0/5]poe en 

 PSE or power source not ready. Check for loose DIMM connection or PSE firmware corruption and verify that the power source has been turned on.

莫非是卡槽出问题了？