接口下无配置,接口也是三层接口,我起了一个三层聚合组,将物理口加入到组里报如下日志,什么原因导致的?
%Dec 21 18:00:26:672 2021 H3C IFNET/3/IF_JUMBOFRAME_WARN: The jumboframe of the aggregate interface Route-Aggregation1 is not su pported on the member port GigabitEthernet5/0.
%Dec 21 18:00:26:676 2021 H3C IFNET/3/IF_JUMBOFRAME_WARN: The jumbofram e of the aggregate interface Route-Aggregation1 is not supported on the member port GigabitEthernet5/1.
全部配置: interface Route-Aggregation1 , qu ,inter rang 物理口 ,port link-mode route(接口下无其他配置,只剩下combo enable copper),
port link-aggregation group 1,然后就出现上面的日志
接口下无配置,接口也是三层接口,我起了一个三层聚合组,将物理口加入到组里报如下日志,什么原因导致的?
%Dec 21
18:00:26:672 2021 H3C IFNET/3/IF_JUMBOFRAME_WARN:
The jumboframe of the aggregate interface
Route-Aggregation1 is not su
pported on the member port GigabitEthernet5/0.
%Dec 21
18:00:26:676 2021 H3C IFNET/3/IF_JUMBOFRAME_WARN: The jumbofram
e of the aggregate interface
Route-Aggregation1 is not supported on the
member port GigabitEthernet5/1.
全部配置: interface Route-Aggregation1 , qu ,inter rang 物理口 ,port link-mode route(接口下无其他配置,只剩下combo enable copper),
port link-aggregation group 1,然后就出现上面的日志
(0)
最佳答案
聚合接口不支持巨帧
(0)
端口下只有port link-mode route 和combo enable copper还有port link-agg group 1
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
抄袭了我的内容
×
原文链接或出处
诽谤我
×
对根叔社区有害的内容
×
不规范转载
×
举报说明