linux主机原版本采用bond mode4 模式lacp 802.3ad 与交换机接口动态lacp 捆绑mode dynamic没问题;
新的linux 7.6 版本 可以采用team 模式做链路捆绑 run模式可以选为 lacp ,与交换机接口lacp 动态 dynamic捆绑后会出现
服务器一个接口中断后 整个捆绑组不通。linux7.6 team 与交换机捆绑采用那种模式?或者改回bond mode4 模式?
LAGG/6/LAGG_INACTIVE_PARTNER: Member port XGE1/0/1 of aggregation group BAGG1 changed to the inactive state, because the aggregation configuration of its peer port is incorrect.
IFNET/5/LINK_UPDOWN: Line protocol on the interface Ten-GigabitEthernet1/0/1 is down.
LAGG/6/LAGG_ACTIVE: Member port XGE1/0/1 of aggregation group BAGG1 changed to the active state.
IFNET/5/LINK_UPDOWN: Line protocol on the interface Ten-GigabitEthernet1/0/1 is up.
IFNET/3/PHY_UPDOWN: Ten-GigabitEthernet1/0/1 link status is down.
IFNET/5/LINK_UPDOWN: Line protocol on the interface Ten-GigabitEthernet1/0/1 is down.
LAGG/6/LAGG_INACTIVE_PHYSTATE: Member port XGE1/0/1 of aggregation group BAGG1 changed to the inactive state, because the physical state of the port is down.
IFNET/3/PHY_UPDOWN: Ten-GigabitEthernet1/0/1 link status is up.
LAGG/6/LAGG_ACTIVE: Member port XGE1/0/1 of aggregation group BAGG1 changed to the active state.
LLDP/6/LLDP_CREATE_NEIGHBOR: Nearest bridge agent new neighbor created on Port Ten-GigabitEthernet1/0/1 (IfIndex 1), Chassis ID is 1c20-dbe4-a400, Port ID is 1c20-dbe4-a400.
IFNET/5/LINK_UPDOWN: Line protocol on the interface Ten-GigabitEthernet1/0/1 is up.
LAGG/6/LAGG_INACTIVE_PARTNER: Member port XGE1/0/1 of aggregation group BAGG1 changed to the inactive state, because the aggregation configuration of its peer port is incorrect.
IFNET/5/LINK_UPDOWN: Line protocol on the interface Ten-GigabitEthernet1/0/1 is down.
LAGG/6/LAGG_ACTIVE: Member port XGE1/0/1 of aggregation group BAGG1 changed to the active state. IFNET/5/LINK_UPDOWN: Line protocol on the interface Ten-GigabitEthernet1/0/1 is up.
(0)
最佳答案
亲~登录后才可以操作哦!
确定你的邮箱还未认证,请认证邮箱或绑定手机后进行当前操作
举报
×
侵犯我的权益
×
侵犯了我企业的权益
×
抄袭了我的内容
×
原文链接或出处
诽谤我
×
对根叔社区有害的内容
×
不规范转载
×
举报说明
linux bound mode 4 没问题 但是linux采用team 捆绑 run lacp 交换机采用哪种模式?