EWP-WA6322H-FIT 这个型号的AP怎么刷成胖版本啊

通过序列号问下400有没有其它方式吧，我之前咨询的时候是说这个线研发那边有

这个刷完是刷成云模式了，可以用绿洲来管理。这是三合一的

通过BootWare切换模式

1. 切换前的准备

在进行模式切换之前，请将PC的Console线缆连接到AP的Console口。

图17 AP的工作模式切换示意图

2. 进入BootWare主菜单

AP设备上电和重新启动的过程中，在配置终端的屏幕上首先将显示：

System is starting...

Press Ctrl+D to access BASIC-BOOTWARE MENU...

Booting Normal Extended BootWare

The Extended BootWare is self-decompressing....Done.

****************************************************************************

* *

* H3C WA6320 BootWare, Version 7.16 *

* *

****************************************************************************

Copyright (c) 2004-2021 New H3C Technologies Co., Ltd.

Compiled Jan 04 2021 16:00:00

Memory Type : DDR4 SDRAM

Memory Size : 512MB

Flash Size : 128MB

PCB Version : Ver.A

BootWare Validating...

Press Ctrl+B to access EXTENDED-BOOTWARE MENU...

当出现“Press Ctrl+B to access EXTENDED-BOOTWARE MENU...”时，键入<Ctrl+B>，系统进入BootWare主菜单：

Password recovery capability is enabled.

Note: The current operating device is flash

Enter < Storage Device Operation > to select device.

==========================<EXTENDED-BOOTWARE MENU>==========================

|<1> Boot System |

|<2> Enter Serial SubMenu |

|<3> Enter Ethernet SubMenu |

|<4> File Control |

|<5> Restore to Factory Default Configuration |

|<6> Skip Current System Configuration |

|<7> BootWare Operation Menu |

|<8> Skip Authentication for Console Login |

|<9> Storage Device Operation |

|<0> Reboot |

============================================================================

Ctrl+Z: Access EXTENDED ASSISTANT MENU

Ctrl+F: Format File System

Ctrl+C: Display Copyright

Ctrl+Y: Change AP Mode

Enter your choice(0-9):

3. 切换AP模式

在BootWare主菜单下键入<Ctrl+Y>，可以进入AP模式切换菜单，系统显示如下：

Please select the new mode

Current mode is Fit

============================================================================

|NO. Mode |

|1 Fit Mode |

|2 Anchor-AC (Virtual AC mode)   |

|3 Cloud Mode |

|0 Exit |

============================================================================

Enter your choice(0-3):

在AP模式切换菜单下键入相对应的数字，即可切换到对应的模式，模式切换后无需重启设备。