S5120-SI怎么配置端口聚合

参考手册：http://www.h3c.com/cn/d_201111/733115_30005_0.htm
# 创建聚合组1（根据具体情况选择下面两种方式之一）。
l              采用手工聚合方式：创建手工聚合组1
<SwitchA> system-view
[SwitchA] link-aggregation group 1 mode manual
l              采用静态LACP聚合方式：创建静态聚合组1
<SwitchA> system-view
[SwitchA] link-aggregation group 1 mode static
# 将以太网端口GigabitEthernet1/0/1至GigabitEthernet1/0/3加入聚合组1。
[SwitchA] interface GigabitEthernet 1/0/1
[SwitchA-GigabitEthernet1/0/1] port link-aggregation group 1
[SwitchA-GigabitEthernet1/0/1] interface GigabitEthernet 1/0/2
[SwitchA-GigabitEthernet1/0/2] port link-aggregation group 1
[SwitchA-GigabitEthernet1/0/2] interface GigabitEthernet 1/0/3
[SwitchA-GigabitEthernet1/0/3] port link-aggregation group 1
[SwitchA-GigabitEthernet1/0/3] quit
# 通过聚合端口组批量配置成员端口所属VLAN。
[SwitchA] port-group aggregation 1
[SwitchA-port-group aggregation-1] port access vlan 20
[SwitchA-Bridge-Aggregation1] quit
# 显示配置信息。
l              采用手工聚合方式的链路聚合配置信息
<Sysname> display link-aggregation verbose
Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing
Flags:  A -- LACP_Activity, B -- LACP_timeout, C -- Aggregation,
        D -- Synchronization, E -- Collecting, F -- Distributing,
        G -- Defaulted, H -- Expired
 
Aggregation ID: 1,  AggregationType: Manual,   Loadsharing Type: Shar
Aggregation Description:
System ID: 0x8000, 000f-e200-2200
Port Status: S -- Selected,  U -- Unselected
Local:
  Port             Status  Priority  Oper-Key  Flag
-------------------------------------------------------------------------
  GE1/0/1         S       32768     1         {}
  GE1/0/2         S       32768     1         {}
  GE1/0/3         S       32768     1         {}
 
Remote:
  Actor            Partner Priority  Oper-Key  SystemID               Flag
-------------------------------------------------------------------------
  GE1/0/1         0       0         0         0x0000,0000-0000-0000  {}
  GE1/0/2         0       0         0         0x0000,0000-0000-0000  {}
  GE1/0/3         0       0         0         0x0000,0000-0000-0000  {}
结果说明：结果显示本端加入到静态聚合组内的成员端口都处于Selected状态，与对端对应端口是否是Selected状态无关，且无法获知对端成员端口状态。
l              采用静态LACP聚合方式的链路聚合配置信息
<Sysname> display link-aggregation verbose
Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing
Flags:  A -- LACP_Activity, B -- LACP_timeout, C -- Aggregation,
        D -- Synchronization, E -- Collecting, F -- Distributing,
        G -- Defaulted, H -- Expired
 
Aggregation ID: 1,  AggregationType: Static,   Loadsharing Type: Shar
Aggregation Description:
System ID: 0x8000, 000f-e200-2200
Port Status: S -- Selected,  U -- Unselected
Local:
  Port             Status  Priority  Oper-Key  Flag
-------------------------------------------------------------------------
  GE1/0/1         S       32768     1         {ACDEF}
  GE1/0/2         S       32768     1         {ACDEF}
  GE1/0/3         S       32768     1         {ACDEF}
 
Remote:
  Actor            Partner Priority  Oper-Key  SystemID               Flag
-------------------------------------------------------------------------
  GE1/0/1         17       32768         1         0x8000,0000-fc00-6504  {ACDEF}
  GE1/0/2         18       32768         1         0x8000,0000-fc00-6504  {ACDEF}
  GE1/0/3         19       32768         1         0x8000,0000-fc00-6504  {ACDEF}
结果说明：结果显示本端和对端设备上聚合组内的成员端口都处于Selected状态，通过LACP协议报文交互，可使两端聚合组内的成员端口选中状态达成一致，可顺利实现对用户数据的转发。